1) surface modified powder
改性粉体
3) powder modifier
粉体改性剂
1.
Middle-shear and high - shear viscosity, rheological property, storage stability, fullness of film and scrubbing resistance of emulsion paint are improved effectively by use of Clariant T-180 powder modifier with the specific anchor group, hydrophilic and hydrophobic features.
利用科莱恩T-180粉体改性剂特殊的锚定基团及其亲油、亲水的特性,能有效地提高乳胶漆的中、高剪切黏度,改善流变性能,改善贮存稳定性,提高漆膜的丰满度和耐擦洗性。
4) modified SiC nano-powders
改性纳米SiC粉体
1.
The nodular cast iron were reinforced by surface modified SiC nano-powders.
采用改性纳米SiC粉体对球墨铸铁进行了强韧化处理,研究了不同的纳米SiC粉体加入量对球墨铸铁的微观组织、力学性能以及耐磨损性能的影响。
2.
Cast austenitic stainless steel reinforced by modified SiC nano-powders were prepared under industrial conditions.
在生产条件下采用冲入法制备了改性纳米SiC粉体强化奥氏体不锈钢材料。
3.
Cast austenitic stainless steels reinforced by modified SiC nano-powders have been prepared with pour over process under industrial conditions,and the effect of modified SiC nano-powders on the pitting corrosion resistance of the austenitic stainless steel was characterized by pitting chemistry immersion and pitting electrochemistry tests,metallographic analysis,SEM and energy dispersive analysis.
在生产条件下采用冲入法制备了改性纳米SiC粉体强化奥氏体不锈钢试样,用化学浸泡和电化学检测两种方法研究了纳米SiC粉体对不锈钢耐点蚀性能的影响。
5) powder surface modification
粉体表面改性
1.
Optimization conditions of preparation of high solid loading ceramic slurries are investigated by ways of powder surface modification,some better technique ways of powder surface modification being intruduced,and problems at present time are pointed.
从粉体表面改性的方面对高固相含量碳化硅陶瓷料浆的制备工艺进行了研究 ,介绍了一些陶瓷粉体表面改性方法 ,并指出了存在的问题 。
2.
In this paper, optimization conditions of preparation of high solid loading ceramics slurries are in vestigated by ways of powder sulface modification and uses of dispersant, some better technique ways of powder surface modification being intruduced,uses of dispersant being disscussed, and problem at present time are pointed.
通过从粉体表面改性和分散剂的使用两方面对高固相含量料浆的制备工艺进行了研究，介绍了一些陶瓷粉体表面改性方法，讨论了分散剂的作用，并指出了存在的问题。
6) SiO_2 nanometer powder modification
SiO2纳米粉体改性
补充资料：苯胺改性酚醛压塑粉
分子式：
CAS号：
性质：苯酚、甲醛、苯胺在碱性催化剂存在下加热缩聚生成热固性树脂，树脂结构式如下：按一定比例，将树脂与填料、硬化剂、着色剂等混合，经辊压、粉碎而成苯胺改性酚醛模塑粉。本产品主要用于制造在长期使用过程中要求不放出氨的工业制品、交通电器、机电、仪表零件，电讯工业用的绝缘结构零件。
CAS号：
性质：苯酚、甲醛、苯胺在碱性催化剂存在下加热缩聚生成热固性树脂，树脂结构式如下：按一定比例，将树脂与填料、硬化剂、着色剂等混合，经辊压、粉碎而成苯胺改性酚醛模塑粉。本产品主要用于制造在长期使用过程中要求不放出氨的工业制品、交通电器、机电、仪表零件，电讯工业用的绝缘结构零件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条