2) mightiness belt
强力胶带
1.
This paper studies on the interference from frequercy-convertor to microcircuit including collection signal and control signal during mightiness belt is detected.
针对变频器在井下强力胶带检测过程中,对采集信号、控制信号等弱电信号产生的干扰,在分析变频器产生谐波机理的基础上,提出了解决干扰的相应措施,实验证明取得了显著效果。
3) powerful belt conveyor
强力胶带机
1.
The way of the stretching device of powerful belt conveyor and the advantages and disadvantages of the heavy hammer stretching device and the automatic controlling hydraulic stretchine device,and how to turn the heavy hammer stretching device into the automatic controlling hydraulic stretching device and their working state after being reformed.
介绍了强力胶带机张紧装置的方式及重锤式张紧装置和自控液压张紧装置在使用中的优缺点 ,重点说明了重锤式张紧装置如何改造成自控液压张紧装置及改造后胶带机的运行状况。
4) reinforced PSAT
增强胶黏带
5) bonding strength
胶合强度
1.
Formation process of bonding strength during wood gluing operation;
木材胶接时胶合强度的形成过程
2.
5 %,the PF adhesive with moderate viscosity had high bonding strength,and the bonding strength could achieve the demands of GB/T 9846-2004.
实验结果表明,竹焦油替代量对所合成的酚醛树脂胶黏度和胶合强度特性影响较大,当竹焦油添加量为30 g,即替代量达到12。
3.
The influence of different electro-conductive elements and adhesive spread on shielding and bonding strength of Larix plywood was investigated.
以镍粉、石墨粉、不锈钢纤维和铜纤维作为导电单元,脲醛树脂为胶黏剂,制备3层落叶松胶合板,研究不同导电单元和涂胶量对板材电磁屏蔽效能(ESE)及胶合强度的影响。
6) bond strength
胶合强度
1.
The study on bond durability of structural plywood for timber structures mainly consists in determination of bond strength and heat durability of plywood.
木结构用胶合板胶合耐久性的研究,主要是对胶合强度和热耐久性的测定。
2.
The tea waste powder with different sizes as an additive was used to urea-formaldehyde (UF) resin, and the effects of the tea waste powder sizes and amount on the free formaldehyde content of UF resin, the formaldehyde emission, and bond strength of UF resin bonded plywood were studied in this paper.
将不同颗粒度的茶叶废料粉添加到脲醛树脂胶中,研究了茶叶废料的颗粒度、加入量等对脲醛树脂胶黏剂的游离甲醛含量、黏接胶合板的甲醛释放量及胶合强度的影响。
3.
The urea and two active compounds were concentrated to prepare ULR resin,and the ULR resin as an adhesive for plywood was studied by manufacturing plywood,testing its bond strength,and measuring its formaldehyde emission.
结果表明:一定反应条件下,反应时间对ULR树脂的粘度影响不大;面粉添加量对ULR树脂胶接胶合板的胶合强度影响较大;当反应时间为120min、面粉添加量为15%时,ULR树脂胶接胶合板的胶合强度能够满足国家标准(≥0。
补充资料：表光合强度(见光合强度)
表光合强度(见光合强度)
forecast of sowing or transplanting time
b iaoguanghe qiangdu表光合强度见光合强度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条