1) cross wedge rolling
楔横轧
1.
Numerical simulation on cross wedge rolling of shaft parts with eccentric section;
偏心圆截面轴类零件的楔横轧成形数值模拟
2.
Method of codification and retrieval for products of cross wedge rolling;
楔横轧轧件的编码与匹配方法
3.
Research on simulating manufacture of numerical control milling for cross wedge rolling tool;
楔横轧模具数控铣削仿真加工研究
2) CWR
楔横轧
1.
By using FEM(finite element method),the influences of t he model-parameters and the division of cross section reduced ratio on the interio r defects have been researched during the CWR(cross wedge rolling)process wit h two work steps, and the process design of two kinds of shafts used in one car ’s gear-box is improved.
利用有限元数值模拟研究了楔横轧工艺参数及二次轧制中不同变形量分配对轧件内部空心缺陷的影响,并对某汽车变速箱一轴和二轴的成形工艺进行了改进设计,对改进前后所得到的楔横轧轧件进行超声波探伤和低倍组织实验研究。
2.
Reasonable choice of roller diameter is a key techonology of Cross Wedge Rolling(CWR)forming large-sized shafts.
合理选择轧辊直径是楔横轧成形大型轴类件的重要技术指标,采用ANSYS/LS-DYNA有限元分析软件,对楔横轧轧制大型轴类件进行模拟,分析轧辊直径对楔横轧大型轴类件应力应变影响规律,阐明轧辊直径对于楔横轧大型轴类件轧件质量的影响程度,研究结果为实现大型轴类件楔横轧经济化生产提供理论依据。
3.
The application of this technology in process and die design for cross wedge rolling (CWR) will promote the technical development and technology transfer of CWR.
在楔横轧工艺开发和模具设计中应用CAD／CAE／CAM技术，有利于促进楔横轧工艺的发展和推广应用。
3) Multi-wedge cross wedge rolling
楔横轧多楔
1.
Equal diameter axis formed in Multi-wedge cross wedge rolling(MCWR)was numerically simulated and analyzed utilizing the finite element method(FEM)software ANSYS/LS-DYNA.
利用有限元软件ANSYS/LS-DYNA,对楔横轧多楔成形等直径轴进行了数值模拟与分析。
4) MCWR
多楔楔横轧
5) wedge rolling
楔形横轧
1.
Design and calculation of wedge rolling die for aluminum alloy connecting rod pretreated blank;
铝合金连杆预制件楔形横轧模具的设计计算
6) warm cross wedge rolling
温楔横轧
1.
Evolution of pearlite microstructure during warm cross wedge rolling;
高碳钢中珠光体在温楔横轧过程中的组织演变
补充资料：楔横轧
crosswedgerolling：带有楔形模具的两个（或三个）轧辊，以相同的方向旋转，棒料在它的作用下反向旋转的轧制称为楔横轧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条