1) pullulan film
多糖薄膜
2) candy film
糖果薄膜
3) polycrystalline thin films
多晶薄膜
1.
SnTe polycrystalline thin films are deposited by the vacuum evaporation method from the former SnTe crystals, and their microstructure, electrical properties, and surface appearance are studied.
以制备的晶体为原料用真空蒸镀法制备了银灰色SnTe多晶薄膜,并对薄膜的显微结构、伏安特性及表面形貌进行了研究。
2.
In this paper,the absorption coefficient α(λ) ,the extinction coefficient k(λ) ,the refractive index n(λ) and the optical energy gap E g(λ) of CuInSe 2 polycrystalline thin films were studied by the properties of the reflection and transmission.
根据ＣｕＩｎＳｅ２多晶薄膜的反射特性和透射特性，研究了薄膜的吸收系数α（λ）、消光系数ｋ（λ）、折射率ｎ（λ）以及光学禁带宽度Ｅｇ。
3.
AlSb polycrystalline thin films are prepared by vacuum co-evaporation and post-annealing.
采用元素共蒸发法结合退火处理制成了AlSb多晶薄膜。
4) porous film
多孔薄膜
1.
Nanocrystalline titania porous films are prepared on glass substrates via a sol-gel dip-coating method from a tetrabutylorthotitanate solution that contains diethanolamine as the stabilizer of titanium alkoxide and polyethylene glycol (PEG) as a template.
以钛酸丁酯为无机原料、二乙醇胺作稳定剂 ,加入聚乙二醇 (PEG)作模板制备前驱体溶胶 ,通过溶胶 凝胶工艺和浸渍提拉技术在玻璃基片上制备了孔径在 10～ 10 0 0nm范围内可调的纳米TiO2 多孔薄膜 。
2.
ZnO porous films were prepared on glass substrates by PEG-assisted sol-gel method using Zn(CH_3COO)_2·2H_2O as precursor,ethanol as solvent and NH(C_2H_2OH)_2 as chelating agent.
以醋酸锌为前驱体,乙醇为溶剂,二乙醇胺为络合剂,通过聚乙二醇(PEG)辅助的溶胶———凝胶法在玻璃基片上制备了ZnO多孔薄膜。
3.
ZnO porous films were prepared on glass substrates by solgel method using polyethylene glycol (PEG2000) as organic template, Zn(CH_3COO)_2·2H_2O as precursor, ethanol as solvent and NH(C_2H_4OH)_2 as chelating agent.
以聚乙二醇(polyethyleneglycol,PEG2000)为模板剂,醋酸锌(Zn(CH3COO)2·2H2O)为前驱体,乙醇为溶剂,二乙醇胺[NH(C2H4OH)2]为络合剂,通过溶胶凝胶法在玻璃基片上制备了ZnO多孔薄膜。
5) multilayer films
多层薄膜
1.
TiN/TiCN multilayer films have been deposited on HSS,SS and Cu substrates by arc ion plating (AIP) at different biases with other parameters kept constants.
用电弧离子镀方法在高速钢、不锈钢与铜基体上沉积合成TiN/TiCN多层薄膜 ,在其他参数不变的情况下只改变负偏压 ,着重考察不同负偏压下薄膜的沉积温度、膜基结合强度、显微硬度以及表面形貌等 ,研究基体负偏压在沉积多层薄膜中所起的作用。
6) porous films
多孔薄膜
1.
Nanocrystalline titania porous films were prepared on glass substrates with Ti(OC4 H9)4 as precursor and polyethy-lene glycol (PEG) as organic template by sol - gel process.
采用溶胶-凝胶技术,以钛酸丁酯[Ti(OC_4H_9)_4]为前驱体,加入聚乙二醇(polyethylene glycol,PEG)作为模板剂,在玻璃基片上制备了纳米氧化钛多孔薄膜。
2.
The forming mechanism of colloid crystal was discussed; the advantage of dip-drawing method to assemble PS template and fill SnO2 sol was exhibited; the influence of fabricating parameters on the array quality, the number of spheres and morphology of porous films was studied; and the structure and optical properties of PS.
本文采用浸渍-提拉法组装了PS胶体晶阵列,并以此为模板制备了SnO2有序多孔薄膜。
3.
Highly-ordered Nanocrystalline ZnO porous films with high thermal stability were synthesized using zinc acetate (Zn(CH_3COO)_2·2H_2O) as precursor and organic surfactant (polyethylene glycol (PEG), polystyrene spheres (PS)) as templates.
本实验以醋酸锌(Zn(CH_3COO)_2·2H_2O)为原料,以高分子表面活性剂(聚乙二醇PEG和聚苯乙烯微球PS)为模板,合成了热稳定性较好的ZnO多孔薄膜。
补充资料：云芝多糖K,云芝胞内多糖,蛋白多糖体PSK
药物名称：蛋白多糖体PSK
英文名：Krestin
别名：云芝多糖K,云芝胞内多糖,蛋白多糖体PSK
作用与特点：为较好的抗肿瘤免疫剂,并能增强细胞免疫功能.用于辅助治疗消化道肉瘤,肺癌及乳腺癌等肿瘤,有改善症状的效果.
用法用量：口服:3g,1/d,连服数月,剂量可视症状增减.
规格：片剂:1g.
类别：免疫增强剂（免疫反应调节剂）
英文名：Krestin
别名：云芝多糖K,云芝胞内多糖,蛋白多糖体PSK
作用与特点：为较好的抗肿瘤免疫剂,并能增强细胞免疫功能.用于辅助治疗消化道肉瘤,肺癌及乳腺癌等肿瘤,有改善症状的效果.
用法用量：口服:3g,1/d,连服数月,剂量可视症状增减.
规格：片剂:1g.
类别：免疫增强剂（免疫反应调节剂）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条