1) LF refining ladle
LF精炼钢包
1.
Development and application of alumina spinel castable for LF refining ladle;
LF精炼钢包用铝尖晶石浇注料的研制与应用
2) LF furnace
LF钢包精炼炉
1.
Design and application of the 70t LF furnace electrode control system based on the software WinAC;
基于WinAC的70t LF钢包精炼炉电极控制系统设计及应用
2.
In accordance with the characters of the electrode system controller in LF furnace such as the high nonlinearity,time-variant,uncertainty and multivariable input and output coupling,a control strategy based on the controller of fuzzy adaptive decoupline,which applies RBF neural network real-time identification on line and neural network decoupline,is presented.
针对LF钢包精炼炉电极控制系统具有非线性、时变、模型不确定、多输入多输出强耦合的特点,提出一种基于RBF神经网络实时在线辨识和神经网络解耦的模糊自适应控制方案,并进行了控制器设计。
3) converter ladle furnace cencasting
转炉-LF钢包精炼炉-连铸
4) refining ladle
精炼钢包
1.
Experimental Study on Hot Simulation for Steel Temperature Rise in IR-UT-16 Refining Ladle;
IR－UT－16型精炼钢包吹氧升温热模拟试验
2.
The technical measures for increasing the service life of refining ladle lining were presented, and the influence of service conditions on the life during the campaign were investigated.
介绍了提高精炼钢包寿命的技术措施,对比了采用MgO-MA-C砖综合砌筑的试验方案A和采用优质MgO-C砖综合砌筑的试验方案B在精炼钢包中的使用效果,分析了不同工艺因素对钢包寿命的影响。
3.
The practice and effect about unshaped refractory used on the permanent layer of 100t refining ladle is introduced and a whole tamping process with automatic material flow without mold is given.
介绍了安钢第一炼轧厂100 t精炼钢包永久层耐火材料的材质选择及砌筑优化工艺,总结出一套适合该厂生产特点的钢包永久层整体打结工艺,采用无模具自流料打结钢包永久层,取得了良好的生产使用效果,提高了钢包永久层及钢包整体寿命,降低了耐火材料消耗,减少了穿包事故次数。
5) ladle refining
钢包精炼
1.
Physical model of 150t ladle refining process;
150t钢包精炼过程的物理模拟
2.
Research for Cold Roll Blank Forged by Ladle Refining Ingot;
钢包精炼锭锻制冷辊坯的研究
3.
In view of the role the ladle refining plays and its final goal the present paper describes the design of the alloy burdening model by means of the RBF network and verification of the model according to the data acquired from the practical refining operation and comparison with the results of the model prediction and shows the applicability of the RBF network in the model.
针对钢包精炼的作用及其最终目标要求,运用径向基(RBF)网络,对合金配料模型进行设计,并根据精炼实际数据对模型进行验证,然后与BP网络的预测结果进行比较,以显示径向基网络在精炼合金配料模型中的可行性。
6) LF refining
LF精炼
1.
Preparation of chrome-containing Al_2O_3-MgO castable for LF refining ladle slag line;
LF精炼钢包渣线用含铬铝镁浇注料的研制
2.
Optimization of a 75 t LF Refining Process of Clean Stainless Steel 0Cr18Ni9;
0Cr18Ni9纯净不锈钢75t LF精炼工艺的优化
3.
Process for Production of Ultra-Low Sulphur Steel by BOF Tapping Desulphurizing-LF Refining;
氧气转炉出钢脱硫-LF精炼生产超低硫钢的工艺
补充资料：LF钢包精炼炉(上海第五钢铁厂)
LF钢包精炼炉(上海第五钢铁厂)
谕LF钢包精炼炉(上海第五钢铁厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条