1) interfacial adhesion
界面粘合
1.
Short sisal fiber/NR interfacial adhesion was evaluated by three different methods through swelling characteristics, e.
从复合材料的溶胀性能出发 ,用三种不同方法———试样的拉伸破坏溶胀、Lorenz-Parks方程和Kraus公式分析了短纤维 /橡胶的界面粘合状况。
2.
The new research advances in author′s laboratory on short fiber pretreating,interfacial adhesion and the development of short fiber-rubber composite products were reviewed with 40 references.
综述了作者近年来在短纤维预处理、界面粘合和短纤维／橡胶复合材料制品等方面所取得的研究开发成果。
3.
The new advances in research on pretreating short fiber,interfacial adhesion,orientation and its characteristies, rheological properties and the determination methods dynamic properties and .
综述了作者近几年在短纤维预处理、界面粘合、取向及其表征、流变性能与测定方法、动态力学性能、力学性能预测所取得的研究成果。
2) interfacial bonder
界面粘合剂
3) interfacial viscosity
界面粘度
1.
The interfacial viscosity of surfactants Tween 40(polyoxyalkylene sorbitan palmitate) and Span 80 (sorbitan monooleate)and their effects on interfacial viscosity of Daqing, Iranian Light, Iranian Heavy vacuum residue fractions were investigated by using shear interfacial viscosity meter.
采用剪切界面粘度仪考察了表面活性剂Tween40和Span80的油 水界面粘度及其对大庆、伊朗轻质和伊朗重质减压渣油馏分的油 水界面粘度的影响。
2.
The interfacial viscosity of Daqing vacuum residue fractions was investigated by using shear interfacial viscosity meter.
采用剪切界面粘度仪考察了大庆减压渣油超临界馏分(简称大庆减渣馏分)的油-水界面粘度。
3.
The interfacial viscosity of super critical separated Iranian light vacuum residue fractions was investigated by using shear interfacial viscosity meter.
采用剪切界面粘度仪考察了伊朗轻质减压渣油超临界分离馏分的油 水界面粘度。
4) interfacial adhesion
界面粘接
1.
Surface performance and effects on interfacial adhesion of several high performance fibers;
几种高性能纤维的表面性能及其对界面粘接的影响
2.
Study on interfacial adhesion of PE and UPR based composite material;
PE/UPR玻璃钢界面粘接研究
3.
A new method of improving the interfacial adhesion of incompatible polymer blend is introduced.
介绍了改善不相容聚合物共混物界面粘接的一种崭新方法，应用ＳＥＭ技术以动态热力学进行研究。
5) bonding interface
粘接界面
1.
The present measuring methods of the mechanical properties of the propellant/liner bonding interface are compared.
比较了目前测试推进剂/衬层粘接界面性能的方法。
2.
Three acetone-based wet bonding systems, Gluma One-Bond, Bond-1 and One-Step, were used to bond Chrisma composite resin to dry or moist dentin surface, and the bonding interface was observed with Bio-Rad MRC-1024 laser scanning confocal microcope; Microtensile strengths of different groups were measured with Instro 1 195.
目的研究干燥或湿润的牙本质表面状态对丙酮基粘接剂粘接强度和粘接界面微观结构的影响,并探讨粘接强度和粘接界面微观结构之间的内在联系。
3.
The bonding interface were observed with Bio-Rad MRC-1024 laser scanning confocal microscope and microtensile bonding strengths of different groups were measured with Instro 1195.
目的 :研究干燥或湿润的牙本质表面状态对酒精 -水基粘接剂粘接强度和粘接界面微观结构的影响 ,并探讨粘接强度和粘接界面微观结构之间的内在联系。
6) Interfacial adhesion
界面粘结
1.
The interfacial adhesion of unsized and sized carbon fiber with different sizing agents and matrix can be characterized by single fiber fragment test.
本文通过单纤维碎裂法 ,分别对未上浆及不同上浆剂处理的碳纤维与基体的界面粘结性进行表征。
2.
The fatigue behaviour of continuous glass fibre mat reinforced polypropylene composites (GMT PPs) with different interfacial adhesion is investigated by dynamic fatigue tests.
采用动态疲劳试验研究了不同界面粘结状况的 GMT- PP复合材料的疲劳行为。
3.
The improvement in the interfacial adhesion , mechanical properties and mechanism of interaction between the various component have been discussed.
综述官能团化聚烯烃(FPO)在无机填料填充、增强、增韧,纤维增强、填充和阻燃等类型聚丙烯复合材料中的应用,并讨论了FPO改善复合材料界面粘结和提高力学性能的作用机理。
补充资料：高频加热粘合
分子式：
分子量：
CAS号：
性质：用频率范围为0.4~100兆赫的电磁波进行粘合的方法。分为高频介电加热粘合和高频诱导加热粘合两种。适用于塑料、木材、金属、织物等的快速粘合。
分子量：
CAS号：
性质：用频率范围为0.4~100兆赫的电磁波进行粘合的方法。分为高频介电加热粘合和高频诱导加热粘合两种。适用于塑料、木材、金属、织物等的快速粘合。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条