1) nickelbased selffluxing alloy
镍基自熔合金
1.
The thermal spraying process was used to obtain the composite coatings of nickelbased selffluxing alloy reinforced by buckytube on plain carbon steel substrate.
采用氧乙炔火焰喷涂法在45#钢表面制备巴基管增强镍基自熔合金复合喷涂层,并利用激光对所得喷涂层进行重熔处理,用X射线衍射仪和扫描电子显微镜分析复合涂层组织结构,在MHK-500型摩擦磨损试验机上测定了油润滑条件下涂层的摩擦学性能。
2) Ni-based self-fluxing alloy
镍基自熔性合金
1.
Microstructure of Tungsten Carbide(WC) reinforced Ni-based self-fluxing alloy composite coating prepared with oxy-acetylene flame spray-welding was investigated with scanning electron microscopy(SEM) and energy dispersive XRay Spectrometry(EDS),Xray diffraction(XRD) and transmission electron microscopy(TEM).
采用带有能谱仪的扫描电镜、X射线衍射和透射电镜技术分析了氧乙炔火焰喷焊WC增强镍基自熔性合金复合涂层的组织结构,并采用湿砂橡胶轮式磨粒磨损实验机对该涂层、镀铬层以及Q235钢进行了抗磨粒磨损性能测试。
3) Ni-based self-fluxing alloy powder
镍基自熔性合金粉末
1.
The Ni-based self-fluxing alloy powder coposite coating was produced on the substrate of ferrite and pearite base gray iron by the general electrical resistance furnace with graphite protection successfully.
用普通电阻炉加石墨保护的方法成功地在铁素体基灰铸铁及珠光体基灰铸铁基体上制备了镍基自熔性合金粉末复合材料。
4) Ni based self-flux alloy
镍基易熔合金
5) nickel based alloy spray welding layers
镍基合金喷熔层
1.
The nickel based alloy spray welding layers were made by using oxygen-acetylene flame spray welding.
用氧—乙炔火焰喷熔法制取镍基合金喷熔层,通过高温冲蚀模拟试验机对镍基合金喷熔层和其他表面强化层进行高温冲蚀磨损对比试验。
6) Ni based self lubricating alloy
镍基自润滑合金
补充资料：自调自净自度
【自调自净自度】
（术语）同自调项。
（术语）同自调项。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条