1) F 1 float valve tray
F1型浮阀塔板
1.
JF gird valve tray gains the advantage over F 1 float valve tray in total tray pressure difference, foam carrying, capacity, tray leaking.
通过JF导向条阀塔板与F1型浮阀塔板的对比分析 ,表明JF导向条阀塔板在塔板漏液、雾沫夹带、处理能力等方面较F1型浮阀塔板有较大优势 ,是一种新型高效塔板。
2) F1 valve tray
F1型浮阀
1.
But for F1 valve tray, which is used widely in practice, there isn’t any CFD simulation reported.
目前CFD模拟主要集中在筛孔板塔上,而应用十分广泛的F1型浮阀塔板流场的CFD模拟研究却鲜有报道。
3) Super V4 valve tray
Super V4型浮阀塔板
5) valve tray
浮阀塔板
1.
Development and study of B-type directed valve trays;
B型导向浮阀塔板实验研究
2.
In order to have reliable referenced data for selecting the height of floating valves when directed trapezoidal valve trays were applied in industry,the experiment on the structure parameter of which was studied.
采用空气-水系统,在500 mm×500 mm的方形塔内,对不同浮阀的升程对导向梯形浮阀塔板的流体力学进行了实验研究,测定了塔板压降、泄漏和雾沫夹带。
3.
The hydrodynamics of the new employed gradient ringent trapezoidal valve trays are experimentally studied with the air-water system in a 500 mm×500 mm quadrate column.
采用空气-水系统,在500 mm×500 mm的方形塔内,对新开发的斜孔梯形浮阀塔板的流体力学性能进行了试验研究,测定了塔板压降、泄漏和雾沫夹带。
6) float valve tray
浮阀塔板
1.
In comparison with the traditional float valve tray, the new tray had lower pressure drop (80-100Pa lower before valve fully opening and 300-400Pa lower after valve fully opening); weeping was about 10% less; the tray efficiency was about 10% higher; and flow guide function was obvious.
介绍了洛阳石油化工工程公司设备研究所开发的导流浮阀塔板的结构特点、冷模试验结果及工业应用情况。
2.
The FORGRAN Program, flow chats and illutration for calculation of technological design and hydraulics check of the HTV-type float valve tray were given.
给出了一种新型浮阀塔板──HTV船型浮阀塔板的工艺及流体力学校核计算Fortan源程序、框图及计算示例。
补充资料：塔
| 塔 pagoda 供奉或收藏佛舍利（佛骨）、佛像、佛经、僧人遗体等的高耸型点式建筑。又称佛塔、宝塔。起源于印度的窣堵波。汉代末年，丹阳人笮融造楼阁式塔，开中国造塔之先河。中国塔由地宫、塔基、塔身、塔顶和塔刹组成。地宫位于塔基正中地面以下，藏舍利。塔基包括基台和基座。塔刹位于塔顶之上，由须弥座、仰莲、覆钵、相轮和宝珠组成，有的在相轮上加宝盖、圆光、仰月和宝珠。中国塔按性质分有佛塔、高僧墓塔；按材料分有木塔、砖塔、石塔、金属塔、陶塔 ；按结构和造型分有楼阁式塔、密檐塔、单层塔、喇嘛塔。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条