1) hot zinc-plating line
热镀锌线
1.
The plain configuration, technical parameters and main process and equipments characteristic of hot zinc-plating line with hot-rolling sheet as raw material in Handan Iron and Steel Company are introduced.
介绍了以热轧薄板为原料的邯钢热镀锌线的平面布置、技术参数及主要工艺设备特点。
2) zinc-plated
镀锌 热镀锌
3) CGL
热镀锌生产线
1.
The technological features of Masteel's CGL with an annual output of 350000t is introduced.
介绍了马钢冷轧板厂年产35万t连续热镀锌生产线的工艺特点。
2.
2 CGL,such as the film weight control of passivation and the anti-finger print product,the film drying process after passivation, and also include post-treatment surface quality control.
介绍了马钢一钢轧2~#热镀锌生产线辊涂机钝化、耐指纹膜层厚度控制工艺,膜层均匀性控制工艺,涂后膜层固化效果控制工艺,以及表面质量控制。
4) continuous galvanizing line
连续热镀锌线
1.
The structure characteristics,equipment constitute and technical level of process control at main continuous galvanizing lines in the world are described.
本文介绍了首钢2号连续热镀锌生产线的过程控制系统,阐述了当前世界上主要连续热镀锌线的过程系统的结构特点,设备构成及技术水平,对正在建设或准备建设连续热镀锌线的企业具有一定的指导意义。
5) Hot-dip galvanized steel
热镀锌钢
1.
Electrochemical corrosion behaviors of hot-dip galvanized steel in simulated concrete pore solutions;
热镀锌钢在模拟混凝土孔隙液中电化学腐蚀行为
2.
Corrosion resistance of silane/silicate composite films on hot-dip galvanized steel
热镀锌钢表面硅烷/硅酸盐复合膜的耐蚀性能研究
6) hot dip galvanizing
热镀锌
1.
It was found that organic/inorganic compound chromate-free agent has better composite performance,parameters of roll coaters are very important for thickness and surface quality of the film,and reasonable drying and cooling equipments and process are something to guarantee the quality of final products through comparison and analysis between traditional and new hot dip galvanizing proce.
概述了热镀锌钝化及无铬钝化技术的发展历程。
2.
2 hot dip galvanizing line are briefly introduced.
介绍了马钢2号连续热镀锌生产线工艺特点、主要设备性能及主要技术参数。
3.
The effect of two processes on the properties of hot dip galvanizing sheet was investigated.
以在普通热镀锌线生产低碳铝镇静钢深冲热镀锌板为目标,根据CQ、DQ级热镀锌板生产线的工艺特点,设计了以前罩式退火和后罩式退火生产深冲热镀锌板的工艺方案,分别研究了2种工艺对低碳铝镇静钢热镀锌板性能的影响。
补充资料：钢板镀锌、彩涂装备生产线流程
连续热镀锌线
彩涂钢板生产线
开卷机→双切剪→连接机→边部压平机→入口活套→前处理→化学涂铺→化学烘干→初涂机→初烘炉→1号水淬→精涂机→精烘炉→ 2号水淬→废气焚烧装置→出口活套→分剪机→卷取机→称重→产品包装
工艺控制系统
剪切生产线
上料小车→单或双支撑开卷机→校平机→过桥→ 纠偏送料装置→纵剪机→废边收卷机→横剪机→皮带输送机→ 堆垛机→产品包装
彩涂钢板生产线
开卷机→双切剪→连接机→边部压平机→入口活套→前处理→化学涂铺→化学烘干→初涂机→初烘炉→1号水淬→精涂机→精烘炉→ 2号水淬→废气焚烧装置→出口活套→分剪机→卷取机→称重→产品包装
工艺控制系统
剪切生产线
上料小车→单或双支撑开卷机→校平机→过桥→ 纠偏送料装置→纵剪机→废边收卷机→横剪机→皮带输送机→ 堆垛机→产品包装
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条