1) wall thickness effect
壁厚效应
1.
By introducing average specific gravity of the caprolactammelts, the so called" wall thickness effect" and the filter residue modifining value, the He-signed value( 2'/mm) of the inner diameter of the MC Nylon tubes deviate only about + 1 mm to + 5 mm generally from that produced ( 2 / mm) for small and middle tubes and not more than + 10 mm for large tubes.
公式引入己内酰胺熔体平均相对密度、“壁厚效应”的校正值和漏斗残留校正值,使计算结果比较符合生产要求。
2) effective thickness
有效壁厚
1.
By the way of improving roller dimensions, roller number, outer roller path diameter ,stop groove diameter and the effective thickness ,the using reliability of the bearing is advanced.
通过对轴承结构中的滚子尺寸、滚子数量、外圈滚道直径、止动槽直径公差及有效壁厚的改进,提高其使用的可靠性。
2.
This article discusses the analysis of the joint punching shear of grouted offshore jacket leg and pile with the effective thickness of grouted element and presents three different methods to calculate the effective thickness of it with SACS program.
借助SACS程序提供了三种导管架灌浆腿柱的有效壁厚计算方法,举例对采用有效壁厚及仅采用导管架的管壁厚对管节点进行冲剪应力计算对比,结果表明采用有效壁厚计算冲剪应力对优化导管架的设计,降低工程造价是完全可能的。
3) thinkness of fissured edgy'sclay
隙壁粘土厚度效应
4) thick-wall reactor
厚壁反应器
5) thickness effect
层厚效应
1.
Surrounding rock abutment pressure distribution and thickness effect of dynamic catastrophic in fully mechanized sublevel mining stope;
综放采场围岩支承压力分布及动力灾害的层厚效应
6) thickness effect
厚度效应
1.
The macro-results show that the thickness effects are dependent on the test temperature.
宏观结果表明，厚度效应表现出与温度的相关件：1000℃时，试样越薄，屈服强度越高；950℃以下,试样越厚，屈服强度越高。
2.
The dynamical thickness effect—formula of characteristic time,the relation between sensitirity Sn and film thickness,the existence optimum film thickness;the characteristics of conductance activity energy that varies with film thickness were given.
给出了动态厚度效应特征时间的公式,灵敏度Sn与膜厚l的关系和存在最佳膜厚的特征,电导激活能随膜厚变化的特征。
3.
Objective To theoretically analyze the thickness effect of a LiF detector for proton measurement.
目的分析氟化锂（ＬｉＦ） 探测器在测量质子时的厚度效应。
补充资料：凹模壁厚及凹模垫板尺寸
型腔壁部投影面积 壁 厚， 毫 米
F， 厘米2 h1 h2 h3 h4 h5
<5 15~20 30~40 <=10 15~20 30~40
>5~10 20~25 40~50 10~15 20~25 40~55
>10~50 20~30 50~60 15~20 20~30 55~65
>50~100 30~35 60~75 20~25 30~40 65~70
>100~200 35~40 75~85 25~30 40~50 70~75
>200 >40 >85 30~35 50~60 >80
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条