1) CHR
恒速烧结
2) pressureless sintering at constant heating rate
恒速无压烧结
1.
Based on the combined-stage sintering model,the MSC of α-Al2O3 is constructed during pressureless sintering at constant heating rates in a dilatometer.
主烧结曲线对于预测陶瓷的烧结行为非常有用,以主烧结曲线理论为基础,对亚微米级α-Al2O3(平均粒径为350nm)的恒速无压烧结行为进行了研究。
2.
Based on the combined-stage sintering model, the master sintering curve (MSC) for the α-Al2O3 was constructed for pressureless sintering at constant heating rate in a dilatometer.
主烧结曲线对于预测陶瓷的烧结行为非常有用,以主烧结曲线理论为基础,对微米级α-Al2O3的恒速无压烧结行为进行了研究。
3) Isothermal sinter
恒温烧结
4) sintering rate
烧结速度
1.
The sintering process of compacts of nanocrystalline Cu powder by spark plasma sintering (SPS) was investigated with emphasis on the effects of the temperature and sintering rate on grain size, relative density and electrical resistances of the samples by SPS.
利用放电等离子烧结装置考察了纳米铜粉坯体的升温过程,研究了烧结速度和烧结温度对烧结等效电阻、烧结体相对密度及晶粒尺寸的影响。
5) rapid sintering
快速烧结
1.
Effect of metal elements on rapid sintering W-Cu alloy under the action of electric field;
电场作用下金属元素对W-Cu合金快速烧结的影响
2.
Using Gleeble—3500D thermal simulation equipment,the effect of preset heating rate on rapid sintering of W-20Cu system under the action of electric field was investigated.
采用Gleeble—3500D热模拟机,通过对烧结体密度、显微结构以及硬度的分析,研究了电场作用下预设升温速度对W-20Cu体系快速烧结的影响。
6) promoted sintering
加速烧结
补充资料：恒速干燥
分子式：
分子量：
CAS号：
性质：见恒率干燥。
分子量：
CAS号：
性质：见恒率干燥。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条