说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 岩土固结
1)  rock consolidation
岩土固结
2)  ground anchored structure
岩土锚固结构
1.
The ground anchored structures are widely used for almost tens years in China;and the anchored structures are vulnerable to failure by corrosion in the metal elements.
岩土锚固结构在我国已有数十年的应用,如何评估岩土锚固结构的耐久性尤其是腐蚀程度是目前比较关注的问题。
3)  rock and soil anchoring
土、岩锚固
4)  anchorage in rock and soil
岩土锚固
1.
Based on the related test data of anchorage in rock and soil,the main factors affecting the bond strength between grouting anchor rod and rock or soil are analyzed;and the bond strength value is suggested.
根据岩土锚固的有关试验资料,分析了影响锚杆灌浆体与岩土体间粘结强度的主要因素,提出了锚杆灌浆体与岩土体间粘结强度的建议值,并指出了锚杆受荷时,沿锚固段长度粘结应力分布的不均匀性,其不均匀程度随锚固段长度的增加而加剧。
5)  rock and soil reinforcement
岩土加固
6)  geotechnical anchorage
岩土锚固
1.
Debonding of interface between steel strand and grout is the dominant failure mode of conventional prestressed anchor cable,in order to avoid this failure mode,the bulb anchor of structural engineering is modified and used for geotechnical anchorage project to enhance the bearing strength of embedded section.
普通预应力锚索的常见破坏模式是钢绞线与注浆体脱粘,为防止该类破坏模式的发生并增强内锚固段的承载强度,将结构工程的压花锚进行改进并应用到岩土锚固工程,设计了8种不同配合比的水泥基注浆体,将普通锚、压花锚锚固在中风化砂岩中,通过抗拔试验获得了岩锚的荷载~位移全过程曲线。
2.
Debonding of interface between steel strand and grout is the dominant failure model of conventional prestressed anchor cable,and in order to avoid the debonding,the bulb anchor of structural engineering is modified appropriately and used in geotechnical anchorage engineering to enhance the anchorage capacity of embedment section.
普通预应力锚索的常见破坏模式是钢绞线与注浆体脱黏,为防止该类破坏模式的发生并增强内锚固段的锚固能力,将结构工程中的压花锚引入到岩土锚固工程中并进行较大改进,设计8种不同配合比的水泥基注浆体,将压花锚、普通锚锚固在中风化砂岩中,通过抗拔试验获得岩锚的荷载-位移全过程曲线。
补充资料:固结成岩

地质作用中外力作用的一种。岩石的风化侵蚀物质经过搬运、沉积形成沉积物,经过一定的物理的、化学的、生物化学的作用

1.压固作用

由于上覆沉积物逐渐增厚,压力也不断增大,物质密度加大,因此,沉积物中的附着水分逐渐排出,颗粒问的孔隙减少,体积缩小,颗粒之间的联系力增强,进而使沉积物固结变硬。

2.脱水作用

随着压力的增大,温度也有增加,在温度和压力作用之下,不仅排出沉积物颗粒之间的附着水,而且许多含水胶体和含水矿物也会产生失水作用而变为新矿物。

3.胶结作用

填充在沉积物孔隙中的矿物质将分散的颗粒粘在一起。胶结作用是碎屑沉积物成岩的主要方式,如砾和砂胶结后形成砾岩和砂岩。

4.重结晶作用

沉积物受温度和压力影响,可以发生溶解或局部溶解,导致物质质点重新排列,使非结晶物质变成结晶物质,使细粒结晶物质变成粗粒结晶物质。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条