1)  Si 3N 4 ceramic powder
					
	
					
				
				
	
					
				Si_3N_4陶瓷粉末
			
					2)  ceramic powders
					
	
					
				
				
	
					
				陶瓷粉末
				1.
					Synthesis and analysis of boride ceramic powders;
					
					
						
						
					
						硼化物陶瓷粉末的合成与分析
					2.
					borides and composite ceramic powders.
					
					
						
						
					
						采用自蔓延高温还原合成方法制备TiB2,TiB2-A l2O3和ZrB2-Al2O3陶瓷粉末。
					3.
					The base principle,key technology,characteristic and progress on synthesis of ceramic powders by solid-state metathesis reactions are described.
						
						本文扼要地介绍了固态复分解反应法制备陶瓷粉末的基本原理、关键技术、特点及其研究进展。
					
					3)  ceramic powder
					
	
					
				
				
	
					
				陶瓷粉末
				1.
					The experimental research on the low-voltage electromagnetic compaction of PZT ceramic powders;
						
						PZT陶瓷粉末低电压电磁压制实验研究
					2.
					Research on Selective Laser Sintering of Ceramic Powder;
					
					
						
						
					
						选择激光烧结陶瓷粉末的研究
					3.
					Mechanism analysis and experimental research on forming parts by laser sintering ceramic powders;
						
						激光烧结陶瓷粉末成型零件的机理分析和实验研究
					
					4)  Si_3N_4 ceramics
					
	
					
				
				
	
					
				Si_3N_4陶瓷
				1.
					Three groups of organic substance were selected as the main compositions that were used for preparation of high-efficiency organic grinding fluid for Si_3N_4 ceramics.
						
						选择了三组有机物作为主要成分,制备用于磨削Si_3N_4陶瓷的高效有机磨削液,通过在自行研制的磨削机构上进行磨削效率实睑,发现这几种有机磨削液的磨削性能均优于普通磨削液,磨削效率最低可提高1。
					
					5)  Si_3N_4 ceramic
					
	
					
				
				
	
					
				Si_3N_4陶瓷
				1.
					The Mechanism of zirconium coating on Si_3N_4 ceramic surface by molten salt reaction has been studied.
						
						研究了Si_3N_4陶瓷表面镀锆的融盐热析出反应,以X射线衍射仪分析了镀膜物相,以电镜(SEM)对镀件进行了显微观察。
					2.
					The tribological properties of Si_3N_4 ceramic pin sliding against GCr15 steel disc under the lubrication of 500SN base oil containing compound additive T406+P120 were investigated on a MPX2000 friction-wear tester in a pin-on-disc configuration.
						
						对Si_3N_4陶瓷/GCr15钢副在油性剂T406与极压抗磨剂P120复配作用下的摩擦磨损性质进行了对比试验研究。
					3.
					Silicon nitride is one of the most promising structural ceramics for high temperature applications, it is extremely important in both theory and practice to investigate the bonding of the Si_3N_4 ceramic.
						
						使用Cu-Pd-Ti钎料钎焊连接预金属化的Si_3N_4陶瓷。
					
					6)  Si_3N_4 balls
					
	
					
				
				
	
					
				Si_3N_4陶瓷球
				1.
					The transition of NiMoO_2S_2 to the surface of Si_3N_4 balls was also found,which shows that NiMoO_2S_2 super-fine powder could be used as a kind of solid lub.
						
						实验结果表明,NiMoO_2S_2细粉能使 Si_3N_4/ GH3128摩擦副在不同温度下的摩擦系数均有所降低,并显著提高室温下 Si_3N_4的耐磨性,同时还发生了 NiMoO_2S_2在摩擦过程中向 Si_3N_4陶瓷球的转移。
					补充资料:氮化硅(si_(3)N_(2))基陶瓷制品
		氮化硅(si_(3)N_(2))基陶瓷制品
氟化硅(s11N z)基陶瓷制品中国科学院上海硅酸盐研究所供稿
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条