1) Adhesive ceramic coating
胶粘陶瓷涂层
2) ceramic coatings
陶瓷涂层
1.
Study on SHS reactive flame sprayed multiphase ceramic coatings;
自蔓延反应火焰喷涂复相陶瓷涂层研究
2.
Formation mechanism for Al_2O_3 based ceramic coatings on aluminum alloy substrates;
铝合金基体上Al_2O_3基陶瓷涂层形成机理
3.
Study on ceramic coatings by flexible-cord spraying;
软线喷涂陶瓷涂层的研究
3) ceramic coating
陶瓷涂层
1.
Present status on the research of ceramic coatings on magnesium alloys;
镁合金陶瓷涂层研究现状
2.
Study on preparation and wear resistance of nano- Al_2O_3 ceramic coatings on magnesium alloy;
镁合金表面纳米Al_2O_3陶瓷涂层的制备及耐磨性研究
3.
Preparation and corrosion resistance of electrophoretically-deposited Al_2O_3 ceramic coating;
电泳沉积氧化铝陶瓷涂层的制备及耐腐蚀性能
4) ceramic coat
陶瓷涂层
1.
The development of the ceramic coat plug valve core which substrate uses 45 steel is introduced.
该陶瓷涂层的组织细小,晶粒生长较完善,具有结合强度高、表面形态好、残余应力低的特点。
2.
From the mechanism of the ceramic coat of plasma spray,analyzing and measuring the metallic phase of the coating,coating thickness and uniform,density,porosity,bond strength,degree of hardness,agreeability and degree of roughness,at the same time,it gives good reference on repairing invalidation die.
根据等离子喷涂陶瓷涂层机理,对涂层的金相组织、厚度、密度、孔隙度以及涂层的结合强度、硬度、耐磨性和涂层表面粗糙度等性能进行测定和分析,阐述模具表面等离子喷涂陶瓷涂层性能的检测与分析技术,为模具修复提供技术保证。
5) thermal isostatic bonding of ceramic coating
陶瓷涂层热等静压粘结
6) ZrC ceramic coating
ZrC陶瓷涂层
1.
Study on the intensity process and the performance of the ZrC ceramic coating with electrical discharge in the liquid;
液中脉冲放电沉积ZrC陶瓷涂层的强化工艺及涂层性能的研究
补充资料：陶瓷胶
分子式：
CAS号：
性质：用于胶接陶瓷的胶黏剂。要求具有优良的浸润性、耐热性和耐介质性。通常采用环氧树脂胶黏剂。在高温条件下使用的陶瓷多采用无机胶黏剂。无线电陶瓷元件则采用硅树脂胶黏剂和虫胶。陶瓷与其他材料的胶接可采用聚氨酯胶黏剂及酚醛-缩醛胶黏剂等。
CAS号：
性质：用于胶接陶瓷的胶黏剂。要求具有优良的浸润性、耐热性和耐介质性。通常采用环氧树脂胶黏剂。在高温条件下使用的陶瓷多采用无机胶黏剂。无线电陶瓷元件则采用硅树脂胶黏剂和虫胶。陶瓷与其他材料的胶接可采用聚氨酯胶黏剂及酚醛-缩醛胶黏剂等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条