1) dedimerization temperature
解二聚温度
1.
The dedimerization temperatures(T_d)of the dimers of several kinds of cyclopentadiene derivatives DCPD(CCOH)_2,DSHDM,DCPD (COOH)_2,DCPD(COOK)_2 were determined by DTA method.
用热分析法测定了双环戊二烯基乙醇、双1-螺环[2,4]-4,6-庚二烯基甲醇、双环戊二烯二甲酸及其钾盐二聚体的解二聚温度。
2) electrolytic dimerization
电解二聚
3) pyrolysis temperature
热解温度
1.
Effect of pyrolysis temperature on pyrolysate during fast pyrolysis of industrial lignin made by acid precipitation;
热解温度对酸沉淀工业木质素快速热解液体产物的影响
2.
By controlling only pyrolysis temperature of Fe(CO)5, polycrystalline iron fibers with tunable structure and chemical compositions were prepared by carrier gas flow induced method.
仅通过控制Fe(CO)5的热解温度(Td),用气流诱导法制备了化学组成与结构可控的多晶铁纤维。
3.
The change of final pyrolysis temperature,characteristic of waste,rate of gas yield and the key element of gas calorific value were studied in detail.
结果表明:实用热解设备的产气率高,理想热解温度在700℃以下。
4) soluble temperature
溶解温度
1.
The article introduced the water soluble property of PVA fiber,yarn and towel fabric of cotton/PVA fiber,and directly analyzing their difference of water soluble temperature through experiments.
文章通过实验,介绍了水溶性维纶纤维、维/棉交并纱及其所织毛巾的维纶溶解性能,分析了其溶解温度的相异性。
2.
Through experiments of PVA fiber and the yarn of cotton/PVA fiber,this paper investigated the water soluble property of PVA fiber and yarn of cotton/PVA fiber and directly analyzing PVA fibre’water soluble temperature.
通过水溶性维纶纤维和维棉交并纱退维实验,介绍了维纶纤维的溶解性能,定量分析了维纶纤维和纱线的溶解温度。
5) pyrolysis temperature
裂解温度
1.
Effects of the pyrolysis temperature at the first cycle and Si content on the mechanical properties and anti-oxidation properties were investigated.
首先考察首周期裂解温度对2D Cf/SiC-Si材料力学性能的影响,结果表明,首周期采用1200℃裂解,所制备的2D Cf/SiC-Si复合材料界面结合较好,弯曲强度和断裂韧性分别达到305。
2.
The effects of the pyrolysis temperature on the microstructure and mechanical properties of 2D Cf/Si-O-C composites were investigated.
以二维碳纤维布、硅树脂先驱体、SiC微粉和乙醇溶剂为原料,采用先驱体转化工艺制备了2D Cf/Si-O-C复合材料,考察了裂解温度对材料结构和性能的影响。
3.
In this paper synthesis of polyferrocarbosilane(PFCS) was studied, synthesis techniques including reaction temperature, pyrolysis temperature and ferrocene were investigated.
本文研究了聚铁碳硅烷的合成,探索了裂解温度、反应温度、二茂铁等因素对合成聚铁碳硅烷(PFCS)工艺的影响;元素分析、红外光谱、氢谱分析表明:铁被引入到聚铁碳硅烷(PFCS)中,PFCS与聚碳硅烷(PCS)的结构相似。
6) pyrolytic temperature
热解温度
1.
Effects of pyrolytic temperature of phenanthrene on its adsorption to black carbon;
黑碳制备的不同热解温度对其吸附菲的影响
2.
To study the effects of pyrolytic temperature on the cation exchange capacity(CEC) of the crop-residue-derived black carbon(BC) and the Pb2+ and Cd2+ sorption on BC,the BC was isolated from the charred wheat residues by pyrolyzing the wheat residues under the oxygen-limited conditions for 24 h at 150,250,300,400 and 500 ℃ respectively.
为探讨热解温度对秸杆燃烧物提取黑碳阳离子交换量和重金属吸附量的影响,在150～500℃范围24h热解小麦秸秆,提取黑碳,测定黑碳阳离子交换量(CEC)和黑碳吸附铅(Pb2+)和镉(Cd2+)量。
3.
A gas chromatograph was used to measure the oxygen content of coal sample under different pyrolytic temperatures.
通过对采集煤样进行热解试验,用气相色谱仪测定了试验煤样在不同热解温度下氧气的含量,分析了氧气随温度变化规律,得出耗氧速率与温度的数量关系,用于判定煤炭自燃的阶段,为科学控制煤炭自燃、防止煤炭自燃的发生提供决策依据。
补充资料：聚苯二甲酸二烯丙酯预聚物
分子式：
CAS号：
性质： 含有苯二甲酸二烯丙酯结构的低分子量聚合物。主要品种有邻苯二甲酸二烯丙酯(DAP)预聚物、间苯二甲酸二烯丙酯(DAIP)预聚物、对苯二甲酸二烯丙酯(DATP)预聚物和3,6-二氯代内次甲基四氯邻苯二甲酸二烯丙酯预聚物等。其中最主要的是DAP预聚物和DAIP预聚物两种。性能随品种不同而略有差异。制法和用途基本相似。
CAS号：
性质： 含有苯二甲酸二烯丙酯结构的低分子量聚合物。主要品种有邻苯二甲酸二烯丙酯(DAP)预聚物、间苯二甲酸二烯丙酯(DAIP)预聚物、对苯二甲酸二烯丙酯(DATP)预聚物和3,6-二氯代内次甲基四氯邻苯二甲酸二烯丙酯预聚物等。其中最主要的是DAP预聚物和DAIP预聚物两种。性能随品种不同而略有差异。制法和用途基本相似。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条