1) quality of cast infiltration
铸渗质量
1.
The major influenceable elements on the quality of cast infiltration are pouring temperature and mixture of alloy powder briquette.
利用正交试验方法 ,研究了浇注温度、铸件模数、膏块的合金配比及厚度等工艺因素对铸渗质量的影响规律。
2) quality of casting
铸件质量
1.
Production experience has showed that quality of casting has be.
通过对油压机横梁、汽轮机缸体、油轮挂舵臂和宽厚板轧机机架等一些特大型铸钢件的生产,实践表明:采用有机酯水玻璃砂后,铸件质量明显提高,铸件气孔、裂纹减少,表面光洁,尺寸精度提高。
3) casting quality
铸件质量
1.
The effect of reservoir on casting quality in dental high frequency casting;
齿科高频铸造中储金球对铸件质量的影响
2.
This result was obtained by the casting quality enhancing of key parts such as crankshaft, cylinder block and head.
时风ZS1115H型单缸发动机达到欧Ⅱ排放标准,得益于发动机关键零部件如曲轴、缸体、缸盖铸件质量的提升,而铸件质量的提高则主要依靠先进铸造技术和检测方法的应用,其中包括:自动化造型线造型、热芯盒制芯、覆砂铁型铸造、曲轴等温淬火和氮化、光谱快速分析等。
3.
0 and Microsoft Graph 2000 Software,the data management and analysis system for compacted graphite iron casting quality was established.
该系统建立了九类铸件质量数据分类管理的数据库 ,能快速、准确地进行添加、查询、修改和删除数据 ;利用柱形图等图形工具直观地显示数据统计分析的结果 ;能够快速、方便地生成各类不同格式的报表。
4) castings quality
铸件质量
1.
It was analyzed in detail how the working efficiency of ventilating-dusting system attached to the returned sand cooler influenced the moulding sand quality and castings quality, and the improving measures were also proposed.
简单介绍了K·W气流预紧实高压造型线及其通风除尘设施,详细分析了双盘冷却器通风除尘系统工作效率对型砂质量和铸件质量的影响,指出了现用通风除尘系统存在的问题,同时给出了改进措施。
5) billet quality
铸坯质量
1.
The latter has advantages of portable and simple configuration,installing and replacing conveniently,long applying-life,effectively improving billet quality,reducing cost and obviously increasing production efficiency of horizontal continuous caster.
整体式拉坯辊装置具有结构轻便简单,安装更换方便,使用寿命长,能有效提高铸坯质量,降低成本及明显提高水平连铸机生产效率等优点。
2.
The key factor of the caster on effect the billet quality are dealt with,main schemes included:rebuild the mold,add M-EMS,design the arc radius,casting speed,tundish,protective casting in whole process and so on,the best technology parameters are obtained by designing and calculating.
为了提高小方坯铸坯质量,本文对小方坯连铸机中影响铸坯质量的主要设备因素展开了讨论与研究,主要方案有:结晶器改造、采用结晶器电磁搅拌、连铸机弧形半径设计、连铸机拉速设计,中间包设计,全程保护浇铸等,通过设计与计算提出最佳工艺参数。
6) bloom quality
铸坯质量
1.
The effect of stirring intensity and twist moment of mould electromagnetic stirrer(M-EMS) on continuous casting bloom quality was investigated.
研究了结晶器电磁搅拌强度及扭矩大小对铸坯质量的影响。
补充资料：渗渗
1.寒冷貌。 2.指因害怕而产生发冷的感觉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条