1) dewatering rust preventive oil
脱水防锈油
2) cooling water anti-rust oil
冷却水防锈油
3) rust-proof oil
防锈油
1.
Using cooperating effect of different rust-proof agents,a solvent-diluting soft film rust-proof oil was developed for sea equipments.
利用防锈剂之间的协同增效作用,研制出了海洋设备溶剂稀释型软膜防锈油。
2.
The rust-proof oil for aluminum is developed with refined mineral oil as base oil,adding in a film forming agent,antirust additives and a antioxidant.
铝材防锈油是以精制矿物油为基础油,加入成膜剂、多种防锈剂和抗氧剂研制而成。
3.
The influence of rust-proof oils on bearing vibration value is analysed.
分析了防锈油对轴承振动值影响的因素。
4) Antirust oil
防锈油
1.
Electrostatic spray antirust oil possesses good antirust property,proper viscosity and high breakdown Voltage,and it is showed which can satisfy the technological requirements of electrostatic spray antirust by practical application.
静电喷涂防锈油具有较好的防锈性能、合适的粘度和高的击穿电压,实际应用表明能完全满足静电喷涂防锈的工艺要求。
2.
In order to select the appropriate inhibitor for solvent antirust oil applicable to amphibian armored equipment,single factor experiments and orthogonal experiments of inhibitor have been made.
为优选出适用于两栖装甲装备溶剂型防锈油的防锈剂,先后进行了防锈剂的单因素试验和正交试验。
3.
It is more than a year that the antirust period of thin-film antirust oil SY-100 developed with resin,rust inhibitor and other additives.
用树脂、缓蚀剂和其它添加剂研制的SY-100薄膜防锈油在室内的防锈期可达1年。
5) rust preventive oil coating
防锈油膜
1.
In this paper,conducting transformation of rust preventive oil coating in 5% Na 2SO 4 solution under corrosion potential was studied by utilizing potential capacitance method and Mott Schottky analysis.
采用电位—电容法及Mott-Schottky分析技术研究了自腐蚀电位条件下防锈油膜在 5 %Na2 SO4溶液中失效过程的导电机制转变行为 。
6) rust preventive oil
防锈油
1.
Determination of chloride ion in rust preventive oil by ion chromatography
离子色谱法测定防锈油中氯离子
2.
In the light of requirement for electrostatic-proof and rust preventive oil used in electrostatic spraying technology, a series of tests and evaluation was carried out and the formulations of the oil were screened.
针对静电喷涂工艺对防锈油各种性能的要求,探讨了基础油、成膜剂、防锈剂及其它添加辅剂的各自作用及相互之间的配伍性。
补充资料：防锈油水置换性试验
分子式：
CAS号：
性质：测试防锈油排斥金属表面上的水，而使本身吸附在金属表面上的能力的一种方法。是置换型防锈油的质量指标之一。在金属试片上滴一滴水使其润湿，立即在滴水处滴上防锈油，放入潮湿箱中，经规定时间后，观察润湿处的锈蚀情况并进行评定。
CAS号：
性质：测试防锈油排斥金属表面上的水，而使本身吸附在金属表面上的能力的一种方法。是置换型防锈油的质量指标之一。在金属试片上滴一滴水使其润湿，立即在滴水处滴上防锈油，放入潮湿箱中，经规定时间后，观察润湿处的锈蚀情况并进行评定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条