1) longitudinal tear strength
纵向撕裂强度
1.
R and high frost - line in order to make the films have proper longitudinal tear strength ( MD) and horizontal tear strength (TD).
试验发现:为保证合适的薄膜纵向撕裂强度和横向撕裂强度,应在高牵引速度、大吹胀比和高起霜线的条件下进行该树脂的加工。
2) longitudinal tear
纵向撕裂
1.
The longitudinal tear accident of transportation belt happens occasionally in transportation coal system of the power plants, once the tear accident happened, the transportation belt which values hundreds of thousands even millions $ will destroy within several minutes, and causes enormous economic loss.
在火电厂输煤系统中,输煤皮带纵向撕裂事故时有发生,价值数十万元甚至上百万元的输煤皮带,一旦发生撕裂事故,在几分钟内就会全部毁坏,造成巨大的经济损失。
2.
Through advance prevention principle of longitudinal tear,and two torn situation at loading point compression of materials,and foreign body penetrating tearing,it designs sensor devices to prevent loading and tearing pressure penetrating with irregular body.
通过对超前预防输送带纵向撕裂原理进行分析,对于在装载点处易发的物料卡压撕裂和异物穿透撕裂2种撕裂情况,设计出可预防装载点卡压撕裂和异物穿透撕裂的传感装置,该装置利用装载漏斗或溜槽上添加的活页板配合行程开关和压力传感器,判断装载点是否有物料卡压,利用整体缓冲托辊架配合压力传感器,判断装载点是否有异物穿透输送带。
3) longitudinal rip
纵向撕裂
1.
Research on monitoring system for longitudinal rip of steel-cord belt;
钢绳芯输送带纵向撕裂监测系统
2.
The longitudinal ripping mechanism of belt converyor was investigated, a new method was raised and a new design decision of practical equipment was developed to monitor the longitudinal ripping of belt converyor by structural innovation of roller carrier and idler.
分析了带式输送机纵向撕裂机理,提出一种新的防止输送带纵向撕裂的方法,并给出相应实用装置设计方案。
3.
The longitudinal ripping mechanism of steel cord belt was investigated, and the bearing force of assuasive idlers at loading place of trail was analyzed during the belt to be ripped.
分析了矿用钢绳芯输送带纵向撕裂的机理 ,以及撕带时带式输送机落料口处缓冲托辊的受力情况 ,提出了一种新的输送带纵向撕裂监测和报警方法 ,并研制出一套新型的用于钢绳芯输送带纵向撕裂监测的实用系统 ,该系统采用应变式力传感器拾取输送带撕带时所受的附加压力 ,并以所测信号在一定时间内的积分是否超标作为撕带与否的判据 ,具有可靠性高、实时性好、抗干扰能力强和通用性好、安装方便等优点 。
4) horizontal tear strength
横向撕裂强度
1.
R and high frost - line in order to make the films have proper longitudinal tear strength ( MD) and horizontal tear strength (TD).
试验发现:为保证合适的薄膜纵向撕裂强度和横向撕裂强度,应在高牵引速度、大吹胀比和高起霜线的条件下进行该树脂的加工。
5) filling-tear resistance
纬向撕裂强度
6) tearing strength
撕裂强度
1.
Study on the relation between nonuniform structure and tearing strength of PP geotextiles;
丙纶长丝土工布结构不匀与撕裂强度关系的研究
2.
The standard methods for measuring tensile strength and tearing strength,which are important parameters for leather,was introduced in this paper,and the influence of different raw skins on tensile strength and tearing strength for different leather was also discussed.
成革抗张强度和撕裂强度是表明成革质量好坏的重要指标。
3.
Effects on yield strength and elongation ratio, rupture strength and elongation ratio and tearing strength were studied.
对屈服强度及伸长率、断裂强度及伸长率以及撕裂强度等力学性能的研究发现 :在相同长径比及其分布情况下 ,与传统混合法则不同的是屈服强度和伸长率不相等 ,也不是只取决于短纤维的直径 ,而是受直径和长度的共同作用 ;在相同的纤维体积分数时 ,复合材料的断裂强度基本相同 ,而断裂形变和撕裂强度随纤维直径的减小而增
补充资料：起始型撕裂强度
分子式：
CAS号：
性质：测定试样直角部位被撕裂时的强度，又称直角撕裂强度，是橡胶撕裂试验方法之一。
CAS号：
性质：测定试样直角部位被撕裂时的强度，又称直角撕裂强度，是橡胶撕裂试验方法之一。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条