1) ALCHEMI

通道增强微分析原子定位法
1.
The atomic configuration in the parent and martensite phases of Cu-Zn-Al alloys and in the parent, martensite and bainite phases of Cu-An-Zn alloys have been examined by the atom location by channelling enhanced microanalysis (ALCHEMI) method, although the parent phase of both the alloys has been known to be ordered into the DO3 or L(21) type.
虽然Cu—Zn—Al和Cu—Au—Zn合金中的母相已知为DO3或L(21)结构,但通过通道增强微分析原子定位法(ALCHEMI),可以检测Cu—Zn—Al合金的母,马氏体相和Cu—An—Zn合金的母相、马氏体、贝氏体相中的原子配置结果表明。
2) microchannel image intensifier

微通道像增强器
3) Micro-Analysis Channel

微分析通道
4) microanalysis(insitu)

原位微分析
5) Sub-channel analysis

子通道分析
1.
Both neutron-physical and thermal-hydraulic behavior of the multi-layer fuel assembly are analyzed using the MCNP code and the sub-channel analysis code STAFAS,respectively.
应用MCNP程序为该组件建立计算模型,并进行了相应的物理计算;同时运用子通道分析程序STAFAS对多层燃料组件子通道进行了初步的稳态热工分析。
6) In-situ Reinforcement

原位增强
1.
In-situ Reinforcement of Silicone Rubber;

有机硅橡胶原位增强新工艺
2.
As a novel technology,the in-situ reinforcement of silicone polymer via sol-gel process is effective in promoting the dispersion of various fillers in polymer matrix and avoiding the agglomeration of fillers.
基于溶胶-凝胶原理的有机硅橡胶原位增强新方法有效地解决了填料在聚合物基体中的分散和团聚问题,可得到具有更好机械性能和耐热性能的有机硅材料。
3.
The effects of the contents of different regulators including D-sorbital, mannose, galactose, glucose, and fructors on the growth of hydroxyapaptite crystal seeds were studied, and the crystal seeds obtained were then applied to the in-situ reinforcement of calcium phosphate cement.
在此基础上,进一步将合成的晶种应用于磷酸钙骨水泥(简称CPC)的原位增强中,使水化产物晶体之间定向生长和排列,从而达到对CPC进行增强的目的。
补充资料:多通道分析法
分子式:
CAS号:
性质:通常检测离子流的方法主要有两种:电测法和干板检测法。电测法是用来检测固定轨道上的离子流电信号的,它的线性响应好,灵敏度高,动态范围大,但样品用量大;干板法是用干板记录所有被测离子,它可以累加信号,减少样品用量,而且不受离子流起伏的影响,但检出灵敏度低。把这二种技术的优点结合起来,即离子流通过分析器时不再是一条通道扫描,而是多条通道同时让离子通过,这种方法称为多通道分析法。
CAS号:
性质:通常检测离子流的方法主要有两种:电测法和干板检测法。电测法是用来检测固定轨道上的离子流电信号的,它的线性响应好,灵敏度高,动态范围大,但样品用量大;干板法是用干板记录所有被测离子,它可以累加信号,减少样品用量,而且不受离子流起伏的影响,但检出灵敏度低。把这二种技术的优点结合起来,即离子流通过分析器时不再是一条通道扫描,而是多条通道同时让离子通过,这种方法称为多通道分析法。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条