1) rubber blowing extrusion
橡胶挤出扩胀工艺
2) rubber extrusion
橡胶挤出
1.
The performance and feature of melt gear pump in the polymer processing was introduced, and the purpose and characteristic of melt gear pump for plastic and rubber extrusion was listed.
介绍了熔体齿轮泵在聚合物加工中的性能与特点,列举了用于塑料、橡胶挤出的熔体齿轮泵的用途和特点。
3) rubber extruder
橡胶挤出机
1.
Development of CAD Software for Parameterised Design of Rubber Extruder Screw Based on Microsoft Solution Framework (MSF);
应用微软解决方案框架（MSF）研究开发橡胶挤出机螺杆参数化设计的CAD软件系统
2.
The model could be used to analyze on multi-targets of multi-factors, and also be used to design or choice the type of rubber extruder on the purpose of finding the optimization parameters.
该模型可以进行多影响因素下的多目标分析,并应用于橡胶挤出机的结构选型、结构设计、找出最佳的工艺参数等。
3.
Presently in the special engineering field, the design of rubber extruder product is complicated, time-consuming, strongly empirical, heavily depend.
对于橡胶挤出机设备的设计这一专业领域,目前还处于设计元素选定理论依据少、依赖专家经验性强、单独的个性化个案设计多、设计周期长和烦琐的常规设计。
4) extrusion processing
挤出工艺
1.
It differs from traditional tube extrusion processing.
为得到较好的导管截面形状,本文从材料的流变特性、机头设计、注气流量的控制以及挤出工艺参数的调节四个方面进行了实验研究,得出的结论对双腔导管的挤出成型有一定的参考作用。
5) extrusion process
挤出工艺
1.
Material properties and extrusion process of PE sheath of optic fiber cables;
光缆聚乙烯护套材料性能及其挤出工艺
2.
Problems to be solved in the extrusion process of LLDPE;
线性低密度聚乙烯挤出工艺中的几个问题
3.
The plastification quality of PVC profiles is discussed from such two aspects as the extrusion process and the assembling precision of the extrusion cylinders and screws.
从挤出机的挤出工艺和机筒、螺杆装配精度两方面讨论了与PVC异型材塑化质量的关系,提出了调整、改善塑化质量的方法。
6) extrusion
[英][eks'tru:ʒən] [美][ɛk'struʒən]
挤出工艺
1.
Al2O3 and SiC green tape with 02mm thickness used for LOM were prepared from a 48vol% ceramic suspension in a LDPE based organic vehicle by extrusion technique Rheological characterization of alumina suspension was performed Differential thermal analysis and SEM microstructure analysis of green tape were complete
采用挤出工艺制备了用于ＬＯＭ技术中的Ａｌ２Ｏ３和ＳｉＣ陶瓷片坯件，厚度０。
补充资料：工艺分类橡胶
分子式：
CAS号：
性质：又称TC橡胶。按规定的配方标定生胶的硫化速率，并分别用蓝、黄、红三种不同颜色圈标志区分硫化速率为快、中、慢三个等级。凡按工艺性能标准进行分级的天然橡胶称为工艺分级天然橡胶。
CAS号：
性质：又称TC橡胶。按规定的配方标定生胶的硫化速率，并分别用蓝、黄、红三种不同颜色圈标志区分硫化速率为快、中、慢三个等级。凡按工艺性能标准进行分级的天然橡胶称为工艺分级天然橡胶。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条