说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 赘余力矩
1)  superfluous moment
赘余力矩
1.
By example analysis, the equivalent length η of superfluous moment of grousers iscalculated ; the four calculation factors affecting η are analyzed and compared, obtaining therelationship and influence between spring displacement and grouser d.
通过实例分析,计算桩拉赘余力矩的当量长度值η,对影响η值的四个计算因子进行分析对比,给出弹簧装置变位与桩柱整体弯曲变形之间的的关系和相互的影响;指出本法的优点,不仅在于桩柱的受力分析上,而且能合理地分析确定整个桩柱系统的变形,为桩柱系统的整体优化设计的分析奠定了基础。
2)  surplus unknow moment
赘余弯矩
3)  redundant reaction
赘余反力
4)  Two kinds of unknown forces
两类赘余力
5)  Extraneous torque
多余力矩
1.
Mechanism and suppression of extraneous torque of motor driver load simulator;
电动负载模拟器多余力矩产生机理及抑制
2.
By analyzing the mechanism of production of the extraneous torque,the extraneous torque compensation and adjustment are made.
根据该型号导弹舵机的特点,对系统关键元件的选择设计进行了分析,建立了系统的数学模型,并通过分析多余力矩的产生机理,对系统进行了多余力矩补偿和校正,最后进行了仿真分析。
3.
The connect rigidity is analyzed which influences the performance of whole simulator, including stability、machine resonance and extraneous torque.
介绍了电动负载模拟器的结构,并建立其数学模型;分析了连接刚度对系统性能的影响,主要包括:系统稳定性、机械谐振和多余力矩等;最后,对数学模型进行了数字仿真,仿真结果表明在满足系统稳定性和机械谐振频率要求的条件下,适当降低连接刚度有利于系统的调节和性能改善。
6)  disturbance torque
多余力矩
1.
After the disturbance torque is compensated according to the invariance theory,the system can still not meet the requirement.
建立了电动伺服加载模型,基于不变性原理对多余力矩进行补偿仍不能满足要求的情况下,利用模糊控制的快速响应特性,针对该系统设计出PI和模糊控制相结合的分段复合控制器。
2.
The analysis of simulation result show that some rules how to select impor- tance parameter should be complied with and the controller has excellent performance and a satisfying ability to decrease the disturbance torque.
通过仿真,揭示了控制器设计中几个重要参数选择的依据;结果表明该方法具有很好多余力矩抑制能力及控制性能,显示了良好的应用价值。
3.
According to characteristic of synchro-compensation eliminating disturbance torque for electro-hydraulic loading simulator, referring to the method of model reference adaptive control system, this paper takes steering as referring model, synchro-motor as controlled system to improve the precision of synchro-compensation and eliminate disturbance torque at most.
针对电液负载仿真台中位置同步补偿法克服多余力矩系统的特点,参照模型参考模糊自适应的控制方法,以舵机系统为参考模型,同步系统为被控系统来提高同步控制的精度,以便更大程度上消除多余力,仿真和分析结果表明该方法对提高同步精度十分有效。
补充资料:出赘
1.男子到女家就婚,成为女家的一员。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条