1) composite base material
复合基材
1.
The relations between the mechanical properties, morphological structures andcomposition formula ratio of PP/PE composite base materials are studied.
研究了PP/PE共混复合基材的力学性能和形态结构与组成配比的关系。
2) muti-phase material
复合基材料
1.
Concrete,a kind of muti-phase material,should be possessed of higher elastic modulus and compressive strength and lower tensile strength.
混凝土作为一种多相复合基材料,具有较高弹性模量和抗压强度及较低的抗拉强度,在受约束作用下少许收缩就会产生裂缝,裂缝产生的材性原因较多。
3) copper matrix composites
铜基复合材料
1.
SiCf/Ti/Cu composite was prepared by foil-fiber-foil method in order to model the effects of Ti as interfacial binder on SiC fiber reinforced copper matrix composites and the corresponding interfacial reactions.
利用箔-纤维-箔法制备了SiCf/Ti/Cu复合材料,用于模拟研究Ti在SiC纤维增强铜基复合材料中用作界面改性涂层时的作用及其界面反应情况。
2.
The reasons for failure of electrodes during spot welding and the latest research on copper matrix composites for electrodes are summarized in the paper.
概述了电阻点焊过程中点焊电极的失效原因及铜基复合材料点焊电极的研究进展。
3.
In this paper,the surface treatment of carbon fiber and the research progress on the fabrication and properties of the carbon fiber reinforced copper matrix composites are introduced.
介绍了碳纤维的表面处理及碳纤维增强铜基复合材料的制备工艺与性能的研究进展。
4) aluminum matrix composite
铝基复合材料
1.
Preparation of α-Al_2O_3 particles reinforced aluminum matrix composite and the research of the wear resistance;
铝基复合材料的制备及其耐磨性能研究
2.
Integrative technology of solidification and forming for aluminum matrix composites;
铝基复合材料凝固与成形一体化技术
3.
Study on recycle technique of short alumina fiber reinforced aluminum matrix composites;
氧化铝短纤维增强铝基复合材料回收技术研究
5) Mg Matrix Composites
镁基复合材料
1.
The microstructure of interface for Mg matrix composites with different enhances were summarized, and the optimization way of interface was discussed.
论述了采用不同增强物增强的镁基复合材料的界面微观结构,并对界面优化的方法进行了探讨。
2.
The advantages of the in situ synthesized composites,as well as the principles,merits and disadvantages and the present research progress at home and abroad of the in situ synthesized Mg matrix composites are presented.
阐述了镁及镁合金的特性,介绍了原位复合材料的优点及原位制备镁基复合材料的方法原理、优缺点和国内外的研究进展。
6) titanium matrix composite
钛基复合材料
1.
In-situ synthesis of multiple ceramic particulates reinforced titanium matrix composites(TiB+TiC+Y_2O_3)/Ti;
原位合成多元增强钛基复合材料(TiB+TiC+Y_2O_3)/Ti
2.
Microstructure and mechanical properties of laser melting deposited(TiB+TiC)/TA15 in situ titanium matrix composites;
激光熔化沉积(TiB+TiC)/TA15原位钛基复合材料的显微组织与力学性能
3.
The key problem about the application of titanium matrix composites in high temperature is the oxidation resistance.
针对钛基复合材料发展应用中的关键问题——高温氧化性能,通过800℃高温进行氧化实验得到了氧化增重特性,并利用扫描电镜SEM(Soanning Electron Microscope)、能谱仪EDS(Electronic Differential System)和X衍射XRD(X-ray Diffractometer)研究了钛基复合材料经氧化试验后表面氧化层的结构、相组成及成分。
补充资料：(癸基、己基、辛基)酯与1,2-苯二甲酸的复合物
CAS：68648-93-1
中文名称：(癸基、己基、辛基)酯与1,2-苯二甲酸的复合物
英文名称：1,2-Benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters
Phthalic anhydride, hexyl, octyl, decyl esters
1,2-benzenedicarboxylic acid, mixed decyl and hexyland octyl diesters
Mixed hexyl,octyl,decyl phthalates
Phthalic anhydride,hexyl,octyl,decyl esters
中文名称：(癸基、己基、辛基)酯与1,2-苯二甲酸的复合物
英文名称：1,2-Benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters
Phthalic anhydride, hexyl, octyl, decyl esters
1,2-benzenedicarboxylic acid, mixed decyl and hexyland octyl diesters
Mixed hexyl,octyl,decyl phthalates
Phthalic anhydride,hexyl,octyl,decyl esters
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条