说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 水平承载性能
1)  Horizontal load-carrying capability
水平承载性能
2)  Horizontal bearing properties
水平承载特性
3)  horizontal load-bearing behavior
水平承载性状
1.
In this precondition, the horizontal load-bearing behavior and the working mechanism of pile foundations with defective pile has been .
本文采用三维非线性有限元法研究了含有缺陷桩的桩基础的水平承载性状和桩、土相互作用机理,研究了出现断桩、缩径桩和扩径桩三种缺陷情况下,桩基础的水平承载性状。
4)  lateral load
水平承载
1.
Numerical analysis of behavior of thin-wall pipe pile under lateral load in layered soil;
成层地基中薄壁管桩水平承载性状数值分析
2.
In recent years, due to the development of engineering, such as ocean, road and bridge engineering, people begin to notice the bearing capacity of the pile under lateral load.
在支盘桩基研究中,人们主要注意其竖向承载力的分析,在海洋、道桥等工程的迅速发展下,桩基的水平承载力也愈来愈引起人们的关注。
3.
The behavior of PCC pile ,that subjected to lateral load has been studied in this paper.
本文主要围绕现浇混凝土薄壁管桩(以下简称PCC桩)这一新型的桩基结构型式的水平承载性状展开研究,通过室内模型试验、现场试验、有限元数值模拟分析试验及弹性幂级数解析法分析等手段,对PCC桩水平承载的桩身受力性状,桩身挠曲位移,桩身弯距分布,桩与桩周土相互作用的地基反力等几方面进行了初步的探讨和研究,最后将PCC桩与目前工程中的两种常用于承受水平荷载的桩型进行对比计算分析,得到有意义的结论。
5)  bearing capability
承载性能
1.
Based on re-classification of Abbott-Firestone curve, surface bearing index, core fluid retention index and valley fluid retention index are introduced to evaluate the bearing capability and lubricant retention property of a machined surface.
基于对轮廓支承长度率曲线的重新划分,本文介绍了表面承载指数、核心区液体滞留指数和谷底液体滞留指数三个参数,用来评价表面承载性能和储油性能,同时通过试验验证了三个评价指数的变化规律,说明比其它评价方法具有更明确的物理意义。
2.
Based on re classification of Abbott Firestone curve,surface bearing index,core fluid retention index and valley fluid retention index were introduced to evaluate the bearing capability and lubricant retention property of a machined surface.
在重新划分Abbott Firestone曲线的基础上 ,引入表面承载指数、核心区液体滞留指数和谷底液体滞留指数三个参数 ,用来评价表面承载性能和储油性能 ,同时通过试验找到三个评价指数的变化规律 ,证明比其它评价方法具有更明确的物理意义。
3.
Furthermore, onthespot experimenting data are collected and detailed analysis is made on the bearing capability, load settlement and load shares of the raft and pile, as well as on the displacement, stress and axis stress distribution of the raft.
条基-疏桩复合基础是一种新型的桩基形式,介绍了其在某住宅小区的应用,阐述了试验模型、加载系统及测试系统的设计,通过有说明力的现场实测数据分析了条基-疏桩的承载性能,研究了条基-疏桩复合基础的荷载-位移性状、条基的位移及应力性状、桩的轴力分布以及条基-疏桩的荷载分担比。
6)  loading capacity
承载性能
1.
Influence of glass and joint constraint on loading capacity of monolayer cable net for point supported glass buildings;
玻璃及节点约束对单层索网承载性能的影响
2.
Test study of loading capacity for glass curtain wall with an invisible single cable
隐式单索夹持式玻璃幕墙承载性能的试验研究
3.
Test of loading capacity for glass curtain wall with an invisible single cable
隐式单索夹持式玻璃幕墙承载性能的试验
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条