1) pyrolysis and gasification model
热解气化模型
2) pyrolysis/gasification
热解气化
1.
The influence of moisture on the characteristics of MSW pyrolysis/gasification process is investigated at a temperature range of 600-800℃ by using a large inventory isothermal TGA and an on-line gas product analysis.
利用自行设计的大物料量等温热重实验装置及气体产物在线分析装置,就气化反应温度段600～800℃的范围内,水分对城市生活垃圾热解气化特性影响进行了实验研究。
2.
The design and development of waste treatment technologies have gained focused attention in the world, while the pyrolysis/gasification process is proved to be as an effective technology for the waste treatment, which can reduce the .
城市生活垃圾处理技术的开发已受到世界各国的共同关注，热解气化技术在降低污染物排放(如二噁英、重金属等)及提高能源利用率方面已成为处理这种“离位资源”的新型有效技术。
3) pyrolysis and gasification
热解气化
1.
The research of conditions for pyrolysis and gasification of sugarcane bagasse in steam;
水蒸气氛围下甘蔗渣热解气化条件的研究
2.
The principle of pyrolysis and gasification of waste is introduced,the pyrolysis experiment of medical waste in an external heated fixed-bed is carried out,and the pyrolysis products are sampled and monitored.
介绍了垃圾热解气化的原理,进行了医疗垃圾外热式固定床热解实验,对热解产物进行了取样监测。
3.
The treatment situation of medical wastes in China is introduced,the mechanism of dioxins production and control measures in procedure of waste thermal treatment are analyzed,and the principle and advantages for treating medical wastes by pyrolysis and gasification,especially its inhibitory effect on the synthesis of dioxins are discussed.
介绍了国内医疗垃圾的处理现状,分析了在垃圾的热处理过程中,二口恶英的产生机理和控制措施,论述了热解气化法处理医疗垃圾的原理、优点特别是对二口恶英的合成的抑制作用。
4) gasification and pyrolysis
气化热解
1.
The paper analyzed and stated the principle,characteristics and advantages of the gasification and pyrolysis technology for MSW.
文章概述了城市垃圾焚烧技术特点、以及在我国的应用现状、存在的问题和研究进展情况 ;分析论述了垃圾气化热解技术的原理、特点和优越性 ;提出垃圾气化热解技术将是城市垃圾热处理技术的发展趋
5) Pyrolysis gasification
热解气化
1.
Trial study on catalytic pyrolysis gasification of fresh biomass to produce hydrogen rich gas;
新鲜生物质催化热解气化制富氢燃料气的试验研究
2.
Pyrolysis gasification semicoke charateristics of two kinds of fresh biomass was studied in order to investigate the pyrolysis gasification of fresh biomass.
为了更全面地研究新鲜生物质的热解气化过程,对2种新鲜生物质不同热解气化条件下的半焦特性进行了研究。
3.
Pyrolysis gasification semicoke charateristics of two kinds of fresh biomass were studied in order to better investigate the pyrolysis gasification mechanism of fresh biomass.
为了更全面地研究新鲜生物质的热解气化过程,对二种新鲜生物质不同热解气化条件下的半焦特性进行了研究。
6) pyrolysis
[英][pai'rɔlisis] [美][paɪ'rɑləsɪs]
热解气化
1.
The technology of solid waste incineration with retort pyrolysis gasification has been considered as advanced solid waste disposal technology than other incineration technology, because it has higher rate of changing waste into energy and lower second-step pollution.
在众多的垃圾焚烧技术中，干馏热解气化焚烧技术具有较高资源利用率和较低的二次污染排放的特点己被认为是更先进的废弃物处理技术。
补充资料：AutoCad 教你绘制三爪卡盘模型,借用四视图来建模型
小弟写教程纯粹表达的是建模思路,供初学者参考.任何物体的建摸都需要思路,只有思路多,模型也就水到渠成.ok废话就不说了.建议使用1024X768分辨率
开始
先看下最终效果
第一步,如图所示将窗口分为四个视图
第二步,依次选择每个窗口,在分别输入各自己的视图
第三步,建立ucs重新建立世界坐标体系,捕捉三点来确定各自的ucs如图
第四步,初步大致建立基本模型.可以在主视图建立两个不同的圆,在用ext拉升,在用差集运算.如图:
第五步:关键一步,在此的我思路是.先画出卡爪的基本投影,在把他进行面域,在进行拉升高度分别是10,20,30曾t形状.如图:
第六步:画出螺栓的初步形状.如图
第七步:利用ext拉升圆,在拉升内六边形.注意拉升六边行时方向与拉升圆的方向是相反的.
之后在利用差集运算
第八步:将所得内螺栓模型分别复制到卡爪上,在利用三个视图调到与卡爪的中心对称.效果如图红色的是螺栓,最后是差集
第九步:阵列
第10步.模型就完成了
来一张利用矢量处理的图片
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条