1) hollow plate beam
空心板梁
1.
A brief discussion on prefabrication of 25 m concrete hollow plate beam;
浅谈25m空心板梁的预制
2.
The construction technology of partial prestress pretensioned method hollow plate beam;
部分预应力先张法空心板梁施工技术
3.
Based on the longitudinal flexural failure tests for a 30-m span PPC hollow plate beam supported by three bearings,the failure modes and ultimate carrying capacity of the beam subjected to concentrated load at midspan are studied.
通过对三支座30 m PPC空心板梁进行纵向受弯破坏试验,研究其在跨中集中荷载下的破坏形态和极限承载能力,认为采用三支座形式对梁的极限承载能力和抗变形能力无明显影响,其强度和刚度能满足设计要求。
2) hollow slab beam
空心板梁
1.
Common defects in the construction of pre-stressed concrete hollow slab beam and their prevention;
预应力混凝土空心板梁施工常见缺陷及预防
2.
Erection construction of hollow slab beam using unipod gin pole combined with single leading-in method;
独脚扒杆结合单导梁法架设空心板梁施工
3.
Static force load test on precast hollow slab beam of bridge;
对桥梁预制空心板梁的静力荷载试验
3) voided slab beam
空心板梁
1.
Discussion on advantages and disadvantages of concentrated precast and erection for voided slab beams with less than 20 meters in the heavy rolling area
山岭重丘区公路20m以下空心板梁集中预制安装的利与弊
2.
This paper introduces the main points and method that the height and high effect prestressed concrete voided slab beam bridge is developed and designed by using the partial prestressed concrete technique in middle span bridge.
介绍了中等跨径桥梁采用部分预应力混凝土技术研制设计低高度高效空心板梁的要点、方法及试验研究的主要成果。
5) concrete hollow plate beam
空心板梁
1.
Static test and analysis of prestressed concrete hollow plate beam;
预应力空心板梁的静载试验及分析
6) hollow plate girder
空心板梁
1.
In view of this situation,combining design and finite element analysis,this paper makes systematic study on influence of design and construction deviation on mechanical properties of hollow plate girder in order to avoid deviation in design and construction in the future.
重庆境内某30m跨径后张预应力空心板梁桥在运营过程中出现梁底面沿纵向预应力钢绞线方向出现裂缝,有的裂缝长度竟然沿梁长贯通。
补充资料：凹板印刷机用胶布板
分子式：
分子量：
CAS号：
性质：用于高速轮转凹版印刷机的胶布板。供印刷报纸、杂志、图书等。与凸版印刷机用胶布板的装置位置相同，不与油墨直接接触，但作用不同，通过橡皮表层的弹力作用，将凹沟内的油墨吸到纸张上。印刷时所受的压力较大，胶层须较厚。
分子量：
CAS号：
性质：用于高速轮转凹版印刷机的胶布板。供印刷报纸、杂志、图书等。与凸版印刷机用胶布板的装置位置相同，不与油墨直接接触，但作用不同，通过橡皮表层的弹力作用，将凹沟内的油墨吸到纸张上。印刷时所受的压力较大，胶层须较厚。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条