1) wet concrete
湿态混凝土
1.
Mesomechanics analysis is adopted to analyze the effects of pore water pressure,which has close relation not only with the volumetric deformation of concrete,but also with the developing velocity of cracks,on the mechanical properties of wet concrete.
采用细观断裂力学的方法研究湿态混凝土在外部荷载的作用下,裂纹及孔隙中水压力的大小和影响因素及其对混凝土受力性能的影响。
3) wet shotcrete
湿喷混凝土
1.
Construction technique of wet shotcrete for tunneling with TBM in watery section;
TBM施工隧洞富水段湿喷混凝土施工技术
2.
Based on the selection of the accelerating agents for the wet shotcrete,the applicability of the setting time for the accelerating agents got from the tests concerned are discussed herein,from which a proposal is put forward that the alkali-free accelerating agent is suggested to be preferentially applied to the wet shotcrete for the permanent project.
根据湿喷混凝土速凝剂品种选择试验结果,讨论了速凝剂凝结时间试验结果的适用性,并提出了永久工程湿喷混凝土应优先选用无碱速凝剂的建议。
3.
In view of development of national economy and environmental protection, necessity of researching wet shotcrete technology is discussed in this paper based on rebound reduction, dust reduction and construction quality of wet shotcrete.
从国民经济的发展和环境保护的观点出发 ,从湿喷混凝土减弹、降尘和保证建设质量的角度 ,论述了湿喷混凝土研究的必要性。
4) wet-shot concrete
湿喷混凝土
1.
Application of steel fiber wet-shot concrete technique in tunnel construction;
钢纤维湿喷混凝土技术在隧道工程中的应用
5) wet-jetting concrete
湿喷混凝土
1.
Construction of wet-jetting concrete with acetic fiber net;
浅议聚丙烯纤维网湿喷混凝土施工
2.
Combined with concrete practice of project, it introduces concrete application of wet-jetting concrete technology in project, illustrates its constructive methods & measures, and analyzes its jetting effects.
结合具体工程实践,介绍了湿式喷射混凝土技术在工程中的具体应用,阐述了湿喷混凝土技术的施工方法和施工措施,并对其喷射效果作了分析。
6) moist concrete
潮湿混凝土
1.
Study of bonding properties of spraying polyurea elastomer and moist concrete substrate;
喷涂聚脲弹性体与潮湿混凝土基材粘接性能研究
补充资料:流态混凝土
分子式:
CAS号:
性质:拌合料塌落度值大于20cm的混凝土。一般采用适量的流化剂(高效减水剂或普通减水剂)作为外加剂,加到塌落度为5~10cm的混凝土混合物中使其流动性大幅度提高,达到便于浇灌,减轻甚至免去振捣成型工序的目的。流化剂除了能减少用水量外,还有一定的早强性能。流态混凝土不需提高水灰比与单位用水量,故其强度比普通混凝土的强度有所提高。其他物理力学性能与普通混凝土的相近。—流态混凝土适用于泵送、管道输送、漏斗浇灌及快速施工等场合。
CAS号:
性质:拌合料塌落度值大于20cm的混凝土。一般采用适量的流化剂(高效减水剂或普通减水剂)作为外加剂,加到塌落度为5~10cm的混凝土混合物中使其流动性大幅度提高,达到便于浇灌,减轻甚至免去振捣成型工序的目的。流化剂除了能减少用水量外,还有一定的早强性能。流态混凝土不需提高水灰比与单位用水量,故其强度比普通混凝土的强度有所提高。其他物理力学性能与普通混凝土的相近。—流态混凝土适用于泵送、管道输送、漏斗浇灌及快速施工等场合。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条