1) External gear pump
外啮合齿轮泵
1.
Calculation of dynamic torque acted on external gear pump considering relief groove and trapped oil pressure
考虑困油和卸荷的外啮合齿轮泵动态转矩计算
2.
It is the micro-external gear pump that the key component of the system, which the speed may reach 3,700 Rpm, the instantaneous pressure may reach 35 MPa as well as the addendum circle diameter only has 14 mm.
系统中的心脏和动力源就是微型外啮合齿轮泵,它的转速可达3700 Rpm,瞬时工作压力可达35 MPa,其中齿轮的齿顶圆直径只有14 mm,同时它也是影响该系统合格率的重要部件之一。
2) outer-engaged gear pump
外啮合齿轮泵
1.
Cause and solution for noise from outer-engaged gear pump;
外啮合齿轮泵产生噪声的原因探究及解决方法
2.
Calculation of the geometric size of the modified gear, analysis of the flow characteristics of the outer-engaged gear pump, leakage and gap, radial force are discussed in this paper.
外啮合齿轮泵具有结构简单、体积小、重量轻、自吸性能好、对油液污染不敏感、工作可靠、寿命长、成本低和维修方便等众多优点,故在各种液压机械中得到了广泛应用。
3) external gear pump;gear on gear pump
外啮合齿轮泵<液>
4) external gear-type oil pump
外啮合齿轮式油泵
6) internal gear pump
内啮合齿轮泵
1.
Desingnning tooth profile and "big circular arc" fitting on the "circle tooth profile-conjugated curve" internal gear pump;
“圆齿-共轭曲线”内啮合齿轮泵的齿廓设计和大圆弧拟合
2.
The greatest advantages of internal gear pump are: compact structure, small dimension, light weight, low sound level ,easy to reach high pressure compared with other types of pumpes.
内啮合齿轮泵具有结构紧凑、尺寸小、重量轻、噪音低、易得到高压的特点,在一些场合具有不可替代的作用,具有广阔的发展前景。
补充资料：外啮合齿轮泵
分子式：
CAS号：
性质：一种齿轮泵。由两个外齿轮啮合而输送液体。结构简单、重量轻、造价低、工作可靠、应用范围广。
CAS号：
性质：一种齿轮泵。由两个外齿轮啮合而输送液体。结构简单、重量轻、造价低、工作可靠、应用范围广。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条