1) spray indirect evaporative cooling condenser

喷雾间接蒸发冷却冷凝器
1.
In view of the special demand of underground railway air conditioning for its cooling water system, puts forward two schemes—the spray indirect evaporative cooler and the spray indirect evaporative cooling condenser.
针对地铁空调冷却水系统的特殊要求,提出了喷雾间接蒸发冷却器与喷雾间接蒸发冷却冷凝器两种方案,简要分析了两种方案的工作原理和节能效果,计算表明,采用喷雾冷却设备替代1台600m3/h机械通风冷却塔时,在不考虑冷却塔运行费用的基础上,仅冷却塔补水水费一项每年就可节约17万元。
2) indirect evaporative cooler

间接蒸发冷却器
1.
Thermal analysis of the indirect evaporative cooler;

间接蒸发冷却器的设计计算方法
2.
The Thermal Analysis of the Indirect Evaporative Cooler;

板式间接蒸发冷却器的热工计算方法
3.
Discussion on design of porous functional ceramics dew point plate-fin indirect evaporative cooler;
多孔功能陶瓷露点板翅式间接蒸发冷却器设计探讨
3) water spray evaporative cooling

喷雾蒸发冷却
1.
According to the principle of water spray evaporative cooling, this pap.

喷雾蒸发冷却方式是燃气轮机进气冷却的一种方式。
4) plate indirect evaporative cooler

板式间接蒸发冷却器
1.
The programming research of simplified thermal calculation for plate indirect evaporative cooler;
板式间接蒸发冷却器简化热工计算程序的开发
5) tube type indirect evaporative cooler

管式间接蒸发冷却器
1.
Several mathematical models of tube type indirect evaporative coolers are introduced and compared.
介绍了现有的几种管式间接蒸发冷却器数学模型,并加以比较。
2.
To improve the hydrophilic of tube type indirect evaporative cooler wall surface,the use of porous ceramics material is put forward,combinated of porous ceramics and evaporative cooling technique,and the design calculation of porous ceramics tube type dew point indirect evaporative cooler is carried out from aspects of air volume,air status parameter,structure,heat-transfer and resistance.
为了解决管式间接蒸发冷却器壁面的亲水性问题,提出采用多孔陶瓷材料。
6) Tube Type Indirect Evaporative Cooling

管式间接蒸发冷却器
1.
Working Principle and Test Research of Tube Type Indirect Evaporative Cooling Air Conditioning;
管式间接蒸发冷却器工作原理与试验研究
补充资料:冷却冷凝器
分子式:
CAS号:
性质:一种用来处理含有大量不凝性气体的蒸气—气体混合物的换热器,一般采用列管式换热器。混合气体通常进入管外而冷却介质通入管内。在换热器中,混合气体的冷却和蒸气的冷凝同时进行。沿混合气体流动的方向,温度和蒸气分压同时降低,即同时进行热量和质量的传递,因而设计计算比较复杂。目前采用的方法是:将传热管分成若干段并对每个区域进行热衡算。
CAS号:
性质:一种用来处理含有大量不凝性气体的蒸气—气体混合物的换热器,一般采用列管式换热器。混合气体通常进入管外而冷却介质通入管内。在换热器中,混合气体的冷却和蒸气的冷凝同时进行。沿混合气体流动的方向,温度和蒸气分压同时降低,即同时进行热量和质量的传递,因而设计计算比较复杂。目前采用的方法是:将传热管分成若干段并对每个区域进行热衡算。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条