1) DC torque motor
直流力矩电机
1.
Realization of control system for a wide-range and high-precision velocity DC torque motor;
一种宽范围高精度直流力矩电机速度控制系统的实现
2.
Based on TMS320F2812,the electro-optical theodolite servo controlling system is designed,in which the DC torque motor is used.
针对现有光电设备的伺服控制系统存在的集成度差、价格昂贵等问题,提出一种基于TMS320F2812芯片作为核心处理元件的伺服控制器的设计方法,以DSP为基础构建了伺服控制系统的硬件平台,采用数字化控制算法,实现了对选用直流力矩电机作为执行元件的光电经纬仪的伺服控制。
3.
A kind of motor driven load simulator (DMDLS) that uses DC torque motor and linear driver was designed, and flexibility pole was used to change connection stiffness of it, so measure noise and remain torque was depressed.
提出了一种基于直流力矩电机和线性驱动器的加载方案,并通过弹簧杆调节加载系统连接刚度,降低了影响电动负载模拟器性能的噪声干扰和多余力矩,设计了力矩输出大、加载精度和频响高的电动负载模拟器。
2) DC motor system
直流力矩电机
1.
For the existence of the nonlinear stick - slip friction in the DC motor system of turntable, a steady state error is caused when a proportional derivative control law is applied to the turntable.
针对陀螺漂移测试转台直流力矩电机系统中存在的非线性滞滑摩擦,使转台在PD控制下存在稳态误差的问题,应用具stick-slip摩擦的直流力矩电机系统模型,推导了一种非线性补偿方法。
2.
An adaptive compensation scheme is proposed to compensate the dynamic triction and load disturb- ance in a DC motor system.
针对陀螺漂移测试转台直流力矩电机系统中存在的非线性动态摩擦和负载扰动,为提高转台位置跟踪精度,提出了一种新的自适应补偿方法。
3.
The scheme is applying the decomposition based control design approach to handle the friction model uncertainties as well as the ripple force that exist in the DC motor system.
针对陀螺漂移测试转台直流力矩电机系统中存在的非线性动态摩擦和电机波动力矩,为提高转台摇摆状态位置跟踪精度,该文基于分解控制的设计方法提出了一种新的鲁棒自适应摩擦补偿方法。
3) DC motor
直流力矩电机
1.
A WNN-PID based controller for DC motor s position tracking;
通过该网络对对象进行在线辨识,得到其Jacobian信息,使用神经网络与模糊算法共同在线调整PID参数的方法,实现直流力矩电机位置的准确跟踪,仿真和实验表明:使用该方法能够实现电机位置的准确跟踪;基本克服了一般神经网络控制对初始权值的依赖,大大提高了对象的辨识精度,增强了系统的动态响应品质,并具有很强的鲁棒性。
4) DC torque motor
直流力矩电动机
1.
In this paper,a new speed control system of permanent magnet DC torque motor is introduced.
介绍了一种新型的永磁式直流力矩电动机稳速控制系统 ,采用集成电路芯片TL494输出PWM脉冲来控制IGBT器件 ,从而实现了对电动机的斩波调压供电 ,性能稳定可靠。
2.
The industrial manipulator of 3-DOF has been designed based on DC torque motor,discourses mechanical structure and hardware-software design of control system.
设计了一种基于直流力矩电动机的三自由度工业机械手,论述了该机械手的机械结构及其控制系统的硬件、软件设计。
5) permanent-magnet DC moment motorf
永磁直流力矩电机
6) brushless DC torque motor
无刷直流力矩电机
1.
A brushless DC torque motor without static friction torque;
无静摩擦力矩的无刷直流力矩电机
2.
The paper present a kind of brushless DC torque motor with coreless armature, which haven t static friction torque, inferred method of calculating current, torque, EMF, and etc.
提出了一种电枢上无铁心的无刷直流力矩电机 ,该电机无静摩擦力矩。
3.
Based on brushless DC torque motor,the neural network PID system simulation is carried on,and the comparison with the .
针对无刷直流力矩电机做了神经网络PID控制系统仿真,并与PID控制做了比较。
补充资料：纯轧力矩(见轧制力矩)
纯轧力矩(见轧制力矩)
net rolling torque
ehunzha iiju纯轧力矩(net rolling torque)见轧制力矩。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条