1)  double capillary rheometer
					
	
					
				
				
	
					
				双毛细管流变仪
				1.
					The high speed rheological behavior of EPDM Nordel IP (3745P and 3722P)produced by CGC and INSITE technology was systematically studied through a double capillary rheometer working under constant speed.
						
						采用恒速型双毛细管流变仪研究了由限定几何构型催化剂和INSITE工艺开发的三元乙丙橡胶EPDM Nordel IP(3745P和3722P)高速挤出时的流动规律及挤出畸变特征。
					2.
					The rheological behavior of POE produced by CGC and INSITETM technolo- gy was studied by a double capillary rheometer.
						
						采用双毛细管流变仪研究了由限定几何构型催化剂和INSITETM~(TM)工艺开发的聚烯烃弹性体(POE)的流变性能,分析了POE Engage 8003和POE Engage 8150的粘弹性行为、高速挤出时熔体流动不稳定性及挤出物外观。
					
					2)  Double Die Capillary Rheometer
					
	
					
				
				
	
					
				双料筒毛细管流变仪
			
					3)  capillary rheometer
					
	
					
				
				
	
					
				毛细管流变仪
				1.
					Application of capillary rheometer in polyolefin processing;
					
					
						
						
					
						毛细管流变仪在聚烯烃加工中的应用
					2.
					The extrusion swell behavior of a tube compound was studied by means of a Monsanto capillary rheometer under the conditions with temperature varied from 100 to 130 ℃ and flow rate varied from 1.
						
						用Monsanto毛细管流变仪,在100~130℃及流动速率1。
					3.
					The high speed extrusion behaviors of several polyolefine melts were investigated by a double capillary rheometer of constant speed type.
						
						采用恒速型双毛细管流变仪研究一批聚烯烃熔体的高速挤出行为。
					
					4)  dynamic capillary rheometer
					
	
					
				
				
	
					
				动态毛细管流变仪
			
					5)  dynamic capillary rheometer
					
	
					
				
				
	
					
				毛细管动态流变仪
				1.
					Polypropylene(PP) and CaCO3 blends were extruded in self-made dynamic capillary rheometer, and the effects of vibrating parameters on the dispersion of CaCO3 in melted PP were studied.
						
						使用自制的毛细管动态流变仪挤出聚丙烯(PP)与CaCO_3混合料,研究了振动参数对CaCO_3在PP中分散效果的影响。
					
					6)  optical capillary rheometer
					
	
					
				
				
	
					
				光学毛细管流变仪
				1.
					An optical capillary rheometer has been fabricated with capillary diameter ranged from 50 μm to 200 μm.
						
						根据适合聚合物驱油的微米级玻璃毛细管物理模型 ,研制出光学毛细管流变仪 。
					补充资料:毛细管流变仪
		分子式:
CAS号:
性质:测定聚合物黏度及流动性的一种仪器。主要由毛细管、测力机构、传动、控温、记录和控制等几部分组成。它可以比较接近实际加工条件下测得物料的各种流变学物理量,如流动特性(τ-γ关系,黏度)、弹性记忆、不稳定性流动和结构变化等。主要分为恒负荷型和恒速度型。测定聚合物溶液的黏度以用毛细管流出式的黏度计最方便,常用的有乌氏黏度计和奥氏黏度计两种。
		
		CAS号:
性质:测定聚合物黏度及流动性的一种仪器。主要由毛细管、测力机构、传动、控温、记录和控制等几部分组成。它可以比较接近实际加工条件下测得物料的各种流变学物理量,如流动特性(τ-γ关系,黏度)、弹性记忆、不稳定性流动和结构变化等。主要分为恒负荷型和恒速度型。测定聚合物溶液的黏度以用毛细管流出式的黏度计最方便,常用的有乌氏黏度计和奥氏黏度计两种。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条