1) simulation model base
仿真模型库
1.
Overall framework design of simulation model base system based on web;
基于Web仿真模型库系统的设计
2.
An attempt has been made to develop a simulation model base for cold continuous rolling process so as to meet the requirements for investigating the controlling parameters in different models.
结合研究冷连轧过程控制力能参数模型的需要,提出了开发冷连轧仿真模型库系统的设想。
3.
To realize interoperation and reuse of simulation system at federate lever, simulation model base should be reconstructed to be federate.
为使MATRIXx环境下开发的冷连轧动态仿真模型库系统具有跨平台、跨仿真开发环境的功能,实现仿真系统在联邦高层次上的互操作和可重用,提出了将仿真模型库重构成符合HLA标准的联邦成员的方案:以仿真模型库为对象类,将仿真模型库的功能模块和子模块转换成联邦成员的自身代码,得到联邦成员的仿真模型;设计仿真模型与RTI之间的接口程序,实现从文件形式的输入输出到字符串格式传输的双向转换;设计仿真时间管理类,管理模型库联邦成员的仿真时间推进;在此基础上完成了联邦成员的代码实现。
3) hierarchical simulation modellibrary
层次仿真模型库
4) simulation models
仿真模型
1.
Parameter estimation new algorithms in static simulation models for urban traffic organization and optimization;
城市交通组织优化仿真模型的参数估计新方法
2.
The simulation models for axial vibration of rod string in directional wells were set up.
综合分析了复杂结构定向井井眼轨迹、杆管间摩擦力、抽油机悬点运动规律、抽油泵气体影响或供液不足的井下实际边界条件对抽油杆柱轴向振动的影响,建立了定向井抽油杆柱轴向振动仿真模型,利用该模型实现了悬点与泵示功图的自动快速仿真。
3.
Methods\ Dynamic simulation models of complex structure joints are established via equivalent simulation or equivalent replacement methods.
方法 通过当量模拟或等效置换建立复杂结构结合部动力学仿真模型 。
5) simulation model
仿真模型
1.
Review on simulation model in the research of the remaining oil;
仿真模型在剩余油研究中的应用综述
2.
Establishment of system dynamic simulation model for environment of mining area;
矿区环境系统动力学仿真模型的建立
3.
Dynamic model of oil reservoir and simulation model of remaining oil;
油藏动态模型和剩余油仿真模型
6) emulation model
仿真模型
1.
The moving curves of arbitrary 10 points and the toggle plate of moving jaw are presented in the emulation model.
通过Visual Nastran(VN)建立外动颚匀摆破碎机的仿真模型,分析破碎机的运动过程。
2.
Based on the math model of synchronous motor under the Xad per unit system, the paper constructs the emulation model of salient-pole synchronous motor by using MATLAB/SIMULINK software.
本文研究基于Xad标幺值系统下同步电动机的数学模型,采用SIMULINK软件建立凸极同步电动机的仿真模型。
3.
Based on crack face number distribution in rock mass having fractal character,a three-dimensional fractal emulation model about crack face was set up and an emulation system about crack face was developed by Visual C++6.
以岩体裂隙面数量分布具有分形特征为基础,建立了岩体裂隙面数量的三维分形分布仿真模型,并采用 VisualC++6。
补充资料：仿真模型
被仿真对象的实体模型或具有计算机可直接处理形式的数学模型（见仿真）。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条