说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 电沉积效果
1)  electrodeposition effect
电沉积效果
1.
Application of image processing method to evaluation of electrodeposition effect;
电沉积效果评价中图像处理方法的应用探讨
2.
The application of gray connection analysis theory in electrodeposition method for repair of concrete cracks was researched,gray correlation theory was used to analyse effect degree of concrete parameters on electrodeposition effect.
针对电沉积方法修复混凝土裂缝中混凝土参数对电沉积效果的影响程度进行了试验研究,选用MgSO4电沉积溶液,测定了沉积过程中的试件质量增加率等参数,并采用灰色关联分析方法研究了混凝土参数与电沉积效果之间的相关性,结果表明:电沉积效果与混凝土参数有很大的相关性,水灰比对质量增加率及表面覆盖率的影响程度最大,而保护层厚度对裂缝愈合率的影响程度最大。
2)  deposition effect
沉积效果
1.
Influence of concrete parameters on electrodeposition effect;
混凝土参数对沉积效果的影响
2.
The target backside deposition effect was quantitatively analyzed with the Spectrophotometer.
为了研究气助式静电喷雾中,药液雾化特性对其靶标背部沉积效果的影响,采用Ф80 mm的西红柿果实作为靶标,配制1 g/L的刚果红溶液模拟农药进行喷雾试验。
3)  precipitation static effect
沉积静电效应
1.
Study on the precipitation static effect and its protection;
沉积静电效应及防护研究
4)  sedimental effect
沉降效果
5)  result of prevention
防沉效果
1.
The experiments devised by taguchi were analyzed to effect on the result of prevention sedimentation of Pu transparent priming paint for different constituent prescriptions,finding the main faction.
采用正交实验方法分析了Pu 透明底漆配方各组分对防沉效果的影响,找出主要因素,探讨了Pu 透明底漆防沉效果的最佳配方
6)  settling effect
沉淀效果
1.
In order to improve settling effect,forestall and weaken density current,influence of density current on the settling process of suspended particulate matter are analysed,and according to the influential characteristics of the settling process,the settling tank is transformed.
异重流是挟沙水流的一种特殊运动形式,它的出现给净水工艺带来了极其不利的影响,为了提高其沉淀效果,防止或减弱池中异重流,就异重流对悬浮物沉淀过程的影响进行了分析,并根据沉淀过程所受的影响特点,对沉淀池进行了改造,使水力条件得以改善、沉淀效果得到明显提高。
补充资料:电沉积层织构
分子式:
CAS号:

性质:电沉积层与基体的结晶取向关系。即在沉积层中相当数量的晶粒表现出来的某种共同取向特征,又称择优取向。在多晶沉积层中,每颗晶粒的空间方位可用它的晶轴与相对于宏观基体的参考坐标系坐标轴的夹角来表示。如果沉积层中各晶粒的三根晶轴相对于参考坐标系呈随机分布,这便是无序取向。如果各晶粒的三根晶轴中有一根与参考坐标系有固定的关系,则成为一维取向,即通常所指的织构。这根晶轴即称为择优取向轴。有时择优取向轴的数目不止一根,这就意味着沉积层中有些晶粒是按某种关系相对于基体取向的,而另一些晶粒是按另一种关系相对于基体取向的。改变镀液组成、电流密度、pH等都可能引起织构的变化。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条