1) Camber
[英]['kæmbə(r)] [美]['kæmbɚ]
翘度
1.
Calculation of Deflection and Camber for the Column Jib Crane Based on ANSYS;
基于ANSYS的定柱式旋臂起重机的挠度与翘度设计
2.
Deflections and camber of Pillar Jib Crane are related to the structure type of Pil-lar Jib Crane.
柱式回臀起重机的挠度与其结构型式有关，本文针对常用的两种回臂起重机结构型式，导出悬臂端的挠度计算公式，并考虑立柱的影响设置悬臂的翘度，使设计公式更贴合实际，为制定该类起重机的技术标准，提供了理论依据。
2) warp degree
翘曲度
1.
Improved process method and warp degree of parquet;
工艺改变对多层实木复合地板翘曲度的影响
2.
This article studies the warp degree of the maple both veneered furniture boards.
主要讨论了贴面工艺对杨木多层胶合板双面贴硬枫薄木的家具板材翘曲度的影响,采用正交实验法分析了涂胶量、热压压力、热压温度、热压时间四个因素对杨木多层胶合板双面贴硬枫薄木的家具板材翘曲度的影响。
3.
In order to decrease warp degree of mult-ply parquet composed of plywood-substrata and face veneer,a combination of measures , incising the face veener and prolonging the conditioning time of unfinished parquet,was studied .
研究试验了在面层单板上划刀痕和延长毛坯养生时间的工艺方案对降低多层实木复合地板翘曲度的效果。
3) the crrection of center back
后翘度
4) warp
[英][wɔ:p] [美][wɔrp]
翘曲度
1.
Theoretical analysis about measurement of the warp of precision sheet glass by observing the image reflected from the surface;
观测表面反射像检测精密薄板玻璃翘曲度的理论分析
2.
A Basic Study on the Relation between Wire Diameter and Wafer Warp
多线切割工艺中切割线直径对翘曲度影响的研究
3.
This paper investigates the life of diamond wire and effects of process parameters on the reduction of the wire diameter,warp and surface roughness.
研究了金刚石线的寿命及各切割参数对线径减少量、翘曲度、表面粗糙度的影响。
5) collar inclination
衣领翘度
1.
By means of making various collar patterns, the relationship between the collar inclination and collar type, collar fall width, lapel length is found in this paper, It provides scientific basis for further research of collar construction.
通过纸样试验的方法,找出了衣领翘度与衣领领型、翻领宽度以及驳头长度之间的关系,为衣领结构的进一步研究提供了科学依据。
6) warping stiffness
翘曲刚度
1.
Compared with torsional stiffness, warping stiffness should not be neglected.
开口截面斜拉桥的自由扭转刚度较低,其翘曲刚度和自由扭转刚度相比不可忽略,采用模型的不同将严重影响扭弯频率比,而扭弯频率比对颤振起至关重要的影响,故扭转刚度的正确计算是抗风分析的关键。
2.
The effects of bending-torsion coupling,warping stiffness,shear deformation and rotary inertia are taken into account in the present formulations.
在本文研究中考虑了弯扭耦合、翘曲刚度、转动惯量和剪切变形的影响。
补充资料：翘翘
1.出群貌。 2.高而危殆貌。 3.引申为惶恐谨慎貌。 4.上举貌。 5.众多貌。 6.企盼貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条