1) 90°peel apparatus
90°剥离仪
1.
Testing and developing of 90°peel apparatus for concrete bridge deck waterproofing layer;
桥面防水层90°剥离仪的开发及实验
2) 90° peeling
90°剥离
3) peeling strength tester
剥离强度仪
4) exfoliation
[英][eks,fəuli'eiʃən] [美][ɛks,folɪ'eʃən]
剥落，剥离
5) exfoliation
[英][eks,fəuli'eiʃən] [美][ɛks,folɪ'eʃən]
剥离
1.
Exfoliation Reaction and Recombination of the Layered Hydroxide Zinc Benzoate with a Basal Spacing of 1.44 nm;
层间距为1.44nm层状氢氧化苯甲酸锌剥离重组行为研究
2.
Reason analysis and countermeasures of the trouble of the integrated wheel exfoliation for DF_(4D) and DF_(11) locomotives;
DF_(4D)、DF_(11)型机车整体车轮剥离的原因分析及对策
3.
The property and organieal modification of montmorillonite are also reviewed,and it is indicated that the key issue in preparing epoxy/montmorillonite nanocomposites at present is to achieve exfoliation or delamination of the aggregates in.
阐述了蒙脱土的性质及其在基体树脂中的剥离机理、环氧树脂/蒙脱土纳米复合材料的制备方法。
6) stripping
[英][strip] [美][strɪp]
剥离
1.
Then the macro and micro fracture,chemical composition and microstructure of stripping fragment were analyzed.
工作轧辊CSP热轧机连续发生三起大面积剥离事故,为找出轧辊发生连续剥离原因,首先对事故现场进行了调查分析,其次对剥离碎片的断口宏微观、化学成分及显微组织进行了分析。
2.
It has an excellent effect on stripping and cleaning germs,algae and slime and also in.
TS - 781对菌藻和生物粘泥具有极佳的剥离、清洗作用。
3.
Through the calculation of gear shaped, citrus shaped and cross shaped cross section boundary length, the relationship between stripping difficulty and cross section of composite superfine fiber was explained, which stripping difficulty increases with the increase of boundary length of two components.
通过对齿轮形、米字形、桔瓣形复合超细纤维截面边界长度的计算，说明了复合超细纤维的截面形状与剥离性的关系，剥离难度随两组分边界线长度的增大而增大。
补充资料：90°剥离
分子式：
CAS号：
性质： 剥离角为90°的剥离是以胶层开剥方向与受力方向成90度角的剥离方法，试样由刚性材料和柔性材料胶接制成。标准方法有ISO 8510-1—90黏合软性和硬性粘接件的剥离强度试验90度剥离，ASTM D 2860(87)在90°角和恒定压力下压敏胶带与纤维板黏合性的试验方法，GJB 446—88胶黏剂常温90°剥离强度试验方法(金属对金属)，GJB 447—88胶黏剂高温90°剥离强度试验方法(金属对金属)，GJB 448—88胶黏剂低温90°剥离强度试验方法(金属对金属)等。
CAS号：
性质： 剥离角为90°的剥离是以胶层开剥方向与受力方向成90度角的剥离方法，试样由刚性材料和柔性材料胶接制成。标准方法有ISO 8510-1—90黏合软性和硬性粘接件的剥离强度试验90度剥离，ASTM D 2860(87)在90°角和恒定压力下压敏胶带与纤维板黏合性的试验方法，GJB 446—88胶黏剂常温90°剥离强度试验方法(金属对金属)，GJB 447—88胶黏剂高温90°剥离强度试验方法(金属对金属)，GJB 448—88胶黏剂低温90°剥离强度试验方法(金属对金属)等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条