1) critical comprehension
评断理解
3) evaluate one's comprehension
理解评价
4) critical understanding
批评理解
5) cleavage fracture
解理断裂
1.
Influence of loading rate on critical event of cleavage fracture in notched specimen of low alloy steel;
加载速度对低合金钢缺口试样解理断裂临界事件的影响
2.
Hard brittle particles can have an important influence on cleavage fracture in steels, and can act as cleavage initiators.
钢中的脆硬粒子对钢的解理脆断有直接的影响 ,解理断裂源大都发生在脆硬粒子上 。
3.
The results show that before a critical load is reached, the crack tip is blunted only and in its vicinity the three criteria of cleavage fracture are satisfied in different regions separated from each other.
研究结果表明:在达到某一临界载荷前,裂尖只发生简单的钝化,并且在裂尖前端满足解理断裂三个判据的不同区域是相互分离的。
6) cleavage fracture
解理断口
1.
And with the increasing of temperature,fracture mode varied significantly from cleavage fracture to ductile fracture.
5 %Si Fe热轧合金的层状组织消除 ;其断裂模式随拉伸温度的升高迅速由解理断裂向韧性断裂转变 ;在 2 0 0℃拉伸时 ,为纯解理断口 ,此时该合金即具有高达 2 6 %的延伸率 ;但是在 2 0 0℃ - 40 0℃温区 ,延伸率未随温度的升高而显著增大 ,其断口形貌为解理 +韧窝的混合断口 ;在 5 0 0℃拉伸时 ,为纯韧窝断口 ,其延伸率可达 43
2.
The cleavage fracture surfaces of Ti_3Al and Ti-24Al-11Nb samples after tensile tests in air were studied with a scanning tunnel microscope(STM).
采用隧道扫描显微镜（ＳＴＭ）对Ｔｉ３Ａｌ及Ｔｉ－２４Ａｌ－１１Ｎｂ试样在空气中拉伸的解理断口进行了研究。
补充资料：评断
1.评判裁断。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条