1)  pre-vaporize & premix combustion technique
					 
	
					
				
				 
	
					
				预蒸发燃烧技术
			
					2)  prevaporation & premix technique
					 
	
					
				
				 
	
					
				预蒸发燃烧
			
					3)  the prevaporize & premix technique
					 
	
					
				
				 
	
					
				预蒸发技术
				1.
					This paper introduce briefly the principle of fuel cell and its advantage in comparing with other energy converting system; contrasting the fuel reforming process of different fuel cell and the fuel demanded in their electrode; Studying the result of light oil reforming in applying the prevaporize & premix technique and the partial oxidation technique by experiment.
						
						通过实验研究,探索了应用预蒸发技术和部分氧化技术处理轻油制备燃料电池燃料的效果。
					
					4)  premixed pre-evaporating combustor
					 
	
					
				
				 
	
					
				预混预蒸发燃烧室
				1.
					Modeling for a lean premixed pre-evaporating combustor is presented.
					 
					
						
						 
					
						针对燃气涡轮发动机中贫燃预混预蒸发燃烧室,考虑详细化学反应机理,结合Level-set方法与小火焰模型模拟预混火焰,计算了甲烷/空气贫燃预混燃烧的火焰面的位置,并比较了在贫燃条件下各当量比的NO排放值,计算与实验结果吻合较好。
					
					5)  trigger and simmer technique
					 
	
					
				
				 
	
					
				触发预燃技术
			
					6)  combustion technique
					 
	
					
				
				 
	
					
				燃烧技术
				1.
					Adopting advanced combustion technique, improving the efficiency of heating boilers;
					 
					
						
						 
					
						采用先进燃烧技术提高供热锅炉效率和出力
					2.
					In combination with low NOX combustion techniques inChina and in view of limits of the Standard of Discharging Atmo-spheric Pollutants from Thermal Power Plants to be published soon,this paper presents corresponding technical countermeasures andkey subjects to be studied.
						
						结合我国低NOX燃烧技术水平和即将出版的《火电厂大气污染排放标准》,提出了相应的技术对策和重点研究课题。
					3.
					In this article,the combustion in kinetic heath,the mechanism of even delamination combustion technique and the application of this technique in 3 5t boiler were described.
						
						论述了运动炉排层燃的问题,均匀分层燃烧技术的燃烧机理及在35t锅炉中的应用概况。
					补充资料:浸没燃烧蒸发器
		分子式:
CAS号:
性质: 利用浸没于液面下的火焰将溶液加热的蒸发器。将煤气和空气分别送入混合室混合,然后在浸没于液体中的燃烧室中点火燃烧。炽热烟气即从燃烧室的小孔中逸出,将溶液搅拌和加热。燃烧后的气体与蒸汽一起排出。优点是:(1)没有固定的传热表面,结构比较简单;(2)热量利用率较高;(3)由于有其他气体存在,可以降低溶液的沸点;(4)便于随时开动和停止,特别适用于季节性生产。缺点是:(1)溶液在很大程度上过热;(2)由于燃烧气体的存在,二次蒸汽的利用比较困难。适于蒸发有腐蚀性的溶液,不适于蒸发热敏性的或不能被烟气沾污的溶液。
		
		CAS号:
性质: 利用浸没于液面下的火焰将溶液加热的蒸发器。将煤气和空气分别送入混合室混合,然后在浸没于液体中的燃烧室中点火燃烧。炽热烟气即从燃烧室的小孔中逸出,将溶液搅拌和加热。燃烧后的气体与蒸汽一起排出。优点是:(1)没有固定的传热表面,结构比较简单;(2)热量利用率较高;(3)由于有其他气体存在,可以降低溶液的沸点;(4)便于随时开动和停止,特别适用于季节性生产。缺点是:(1)溶液在很大程度上过热;(2)由于燃烧气体的存在,二次蒸汽的利用比较困难。适于蒸发有腐蚀性的溶液,不适于蒸发热敏性的或不能被烟气沾污的溶液。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
	参考词条