1) annular-slotted
环向开缝
1.
The bursting mechanism of domed annular-slotted bursting disc is studied by experiements.
通过实验得出正拱环向开缝型爆破片的破坏机理,由此导出正拱环向开缝型爆破片的爆破压力计算公式。
2) chordwise slot
弦向开缝
1.
The numerical analysis of aerodynamic performance on the large turning angles cascade with chordwise slots is carried out.
本文对弦向开缝的某大转角压气机叶栅的气动性能进行了数值分析。
3) circumferential crack
环向裂缝
1.
Calculation on circumferential crack and axial crack resistance of embedded pipe below dam;
坝下埋管环向裂缝与轴向抗裂验算
2.
5 m standard span prefabricated long T-beam appears a circumferential crack after form removal,through theoretical analyzing,the uneven settlement of pedestal and shrinkage of concrete are probably the main cause for crack.
5 m的预制长T梁在施工拆模后出现一条环向裂缝的现象,分析了产生裂缝的主要原因可能是台座的不均匀沉降和混凝土的收缩影响造成的。
4) circumferential weld
环向焊缝
1.
Security assessment of over roundness circumferential weld of the pressure vessel
压力容器环向焊缝棱角度超标的安全评定
5) circular seam stretching-amount
环缝张开量
1.
Based on longitudinal structure analysis model of cross-river tunnel,relationship under different critical states between longitudinal deformation curvature and circular seam stretching-amount was built.
应用越江隧道纵向结构分析模型计算了隧道不同纵向变形临界状态下的纵向变形曲率与环缝张开量的关系,并通过与越江隧道渗漏现场检测结果的分析对比,对越江隧道纵向变形曲率与管环渗漏间的相关性进行了评价。
6) circular construction joint
环向施工缝
1.
Experimental study on relation between width of circular construction joint and water pressure resistance of water stop in tunneling works;
隧道工程环向施工缝张开度与止水条抗水压力关系的试验研究
补充资料：缝开
1.裂开。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条