1) synchro-compensation
同步补偿
1.
Based on analyzing the generated mechanism of surplus torque,disturbance of surplus torque can be eliminated by adopting synchro-compensation.
在对多余力矩产生机理的分析基础上 ,采用同步补偿方案减小多余力矩的干扰 ,同时采用自适应的方法提高同步位置跟踪精度 。
2.
According to characteristic of synchro-compensation eliminating disturbance torque for electro-hydraulic loading simulator, referring to the method of model reference adaptive control system, this paper takes steering as referring model, synchro-motor as controlled system to improve the precision of synchro-compensation and eliminate disturbance torque at most.
针对电液负载仿真台中位置同步补偿法克服多余力矩系统的特点,参照模型参考模糊自适应的控制方法,以舵机系统为参考模型,同步系统为被控系统来提高同步控制的精度,以便更大程度上消除多余力,仿真和分析结果表明该方法对提高同步精度十分有效。
2) static synchronous compensator
静止同步补偿器
1.
Robust control of static synchronous compensator;
基于鲁棒控制的静止同步补偿器控制系统
2.
Research of static synchronous compensator principle and applications;
静止同步补偿器原理与应用研究
3.
Development of Static Synchronous Compensator Based on Direct-Current Control;
直接电流控制的静止同步补偿器研究
3) static synchronous compensator(STATCOM)
静止同步补偿器
1.
A mathematic model of static synchronous compensator(STATCOM) as well as a controller using optimal control strategy is presented in the paper based on a twomachine system.
基于双机系统,建立了静止同步补偿器(static synchronous compensator,STATCOM)的数学模型,设计了最优控制器。
2.
In order to meet the real time requirement of static synchronous compensator(STATCOM) with the direct current control method for reference current acquisition,a detection circuit based on Digital Signal Processor(DSP) TMS320F2407 is designed.
阐述了基于瞬时无功功率理论的ip-iq方法的电网谐波和无功电流实时检测原理,针对基于直接电流控制的静止同步补偿器(STATCOM)的实时高要求参考电流的检测应用,设计了以TMS320F2407 DSP为核心的参考电流检测电路,描述了完整的软件流程,仿真实验结果验证了该方法的有效和可行性。
3.
A static synchronous compensator(STATCOM) based on three-phase cascaded voltage source inverter(TC-VSI) is proposed.
提出一种三相电压源型逆变器级联的静止同步补偿器。
4) static synchronous compensator (STATCOM)
静止同步补偿器
1.
The principle of static synchronous compensator (STATCOM) was analyzed.
阐述了静止同步补偿器的基本原理,介绍了一种采用多重化逆变器实现的大容量静止同步补偿器主电路,分析了主电路的工作原理,给出了主电路参数的设计和控制方法,仿真实验结果验证了所述方案的可行性。
2.
Classification and operation principles of static synchronous compensator (STATCOM) are introduced.
介绍了静止同步补偿器(STATCOM)的分类与工作原理;根据不同的补偿目的,校正功率因数与调节系统电压,讨论了各自的控制策略;分析了STATCOM相对于SVC的诸多优点。
5) frequency synchronization error compensation
同步误差补偿
6) STATCOM
静态同步补偿器
1.
STATCOM WITH THE STRUCTURE OF MAIN-AUXILIARY INVERTER;
采用主从型逆变器结构的静态同步补偿器
2.
MEASURMET AND ANALYSIS OF RADIATED EMISSIONS GENERATED BY A STATCOM-BASED SUBSTATION;
基于静态同步补偿器的变电站中电磁辐射测试分析
3.
As the broad application of multilevel inverters in high-power area, a cascaded multilevel (voltage-source) inverter with phase-shifted SPWM (PSSPWM) switching scheme is proposed to be used as a static synchronous compensator (STATCOM), which can eliminate the bulky and weighty transformers and reduce power loss.
随着多电平变换器在高压大功率方面的广泛应用,针对目前静态同步补偿器(STATCOM)存在的问题,提出了将级联多电平逆变器作为STATCOM的主拓扑,运用相移SPWM(PSSPWM)进行调制的解决方案,该方案既能省去庞大笨重的变压器,减小功耗;还可以成倍提高等效载波频率,降低输出谐波含量。
补充资料：同步补偿机
见同步调相机。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条