1) sub-bottom profile
浅层剖面
1.
were identified in the sub-bottom profile in north slope, south China sea.
在南海北部陆坡的浅层剖面上,发现存在若干海底声学异常反射现象,主要有滑塌体丘状体、麻坑、羽状流(海水中)等类型,它们是由于滑塌、浅层气或流体溢出等因素造成的海底微地形地貌突变,可能与海底下存在的天然气水合物有
2.
As there are many multiple waves in the sub-bottom profile,and make it bad for geological interpretation,this paper analyses the reason of appearance of multiple wave,and preliminarily studies the method to remove the multiple wave from the profile.
针对海洋浅层剖面中多次波发育、严重影响地质解释的问题,作者就浅剖资料中多次波现象进行分析,对多次波压制方法进行初步研究。
2) sub-bottom profile
浅地层剖面
1.
Geologic profile charting by integrating sub-bottom profile and bathymetric data
浅地层剖面与测深数据综合成图法在舟山大陆连岛工程中的应用
2.
Preliminary interpretation of a typical sub-bottom profile from the upper slope of Shenhu area in the northern South China Sea
南海神狐海域上陆坡区典型浅地层剖面的初步解释
3.
In this paper,the author introduces the principle of sub-bottom profile system(taking Topas PS018 for an example)and it s application in cobalt-rich crust investigation.
文中以Topas PS018系统为例简要介绍浅地层剖面仪的工作原理和系统组成,重点介绍浅地层剖面在大洋富钴结壳资源调查研究中的应用情况。
3) subbottom profile
浅地层剖面
1.
Features of subbottom profile in the deep sea and the relationship of the abundance of polymetallic nodules;
深海浅地层剖面特征及其与多金属结核富集度的关系
2.
This paper presents an efficient method for picking up the reflection horizons of seabed subbottom profile,based on limiting moving time-window to a proper range and setting jump threshold to the adjacent trace.
根据浅地层剖面记录的特点,在滚动时窗计算能量比值的基础上,提出了一种限制时窗滚动范围,并设定相邻道之间地层反射时间跳跃阈值来搜索浅地层剖面记录反射层位的方法。
4) subbottom profile probing
浅地层剖面探测
1.
The application of physical prospecting techniques of globe such as the subbottom profile probing,earthquake image exploration;side scan sonar and magnetic survey etc.
通过工程实例,论述了浅地层剖面探测、地震映像勘探、侧扫声纳、磁力测量等地球物理勘探技术在海域工程勘探中的部分应用,并简要分析物探方法的适用范围和缺陷。
5) subbottom profiler
浅地层剖面仪
1.
Application of subbottom profiler used in investigation of seabed pipeline routing;
浅地层剖面仪在管线铺设路由调查中的应用
2.
Introduction and application of subbottom profiler(TOPAS PS 018) system;
全海洋浅地层剖面仪及其应用
3.
Adopting subbottom profiler to carry out acoustics exploration is one effective means in marine engineering survey.
阐述了浅地层剖面仪的工作原理,通过浅地层剖面仪在广州华德石化海底输油管道检测中的实际应用情况,分析浅地层剖面仪在工程区域内使用的优缺点,以期为今后该区域内工程勘察及管线检测工作起到一点参考作用。
6) Profiling sonar
浅地层剖面声呐
补充资料:浅底地层剖面仪
| 浅底地层剖面仪 sub-bottom profiler 利用声波探测浅底地层的剖面结构的仪器。探测船在走航过程中,设置在船上或其拖曳体上的换能器向水下铅直发射大功率低频脉冲的声波,抵达水底时,部分反射,部分向地层深处传播,由于地层结构复杂,在不同界面上又都有部分声波被反射,这样,依这些反射界面的特性和深度不同,在船上接收到回波信号的时间和强度也不同,通过对回波信号的放大和滤波等处理后,送入记录器,就可以在移动的干式记录纸上显现不同灰度的点组成的线条,清晰地描绘出地层的剖面结构。 这种仪器是在回声测深仪的基础上发展而成的。探测深度一般为几十米。20世纪60年代后广泛应用于海洋地质调查、港口建设、航道疏浚、海底管线布设、以及海上石油平台建设等方面。具有操作方便、探测速度快,图像连续的特点。 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条