1) I 2c interface protocol
I2C接口协议
2) I2C Protocol
I2C协议
3) I2C interface
I2C接口
1.
The I2C interface has its hardware address.
实现了一个能够产生0~-79dB的衰减范围(1dB/阶)的二声道音量控制信号,该I2C接口通过自身的物理地址进行选通,文中对工作条件和各种信号进行了具体的描述和实现,重点研究了起始结束判断单元和返回信号产生单元的实现。
2.
Serial real-time clock chip S-3530A is of the characters of low working voltage,high accuracy,and uses serial I2C interface to communication and so on.
串行实时时钟芯片S-3530A具有工作电压低、精度高、采用串行I2C接口等特点,在介绍该芯片工作原理的同时,给出了其与C8051F040单片机通讯接口的硬件电路和软件通讯设计。
3.
The paper proposed the design of I2C interface for Ethernet Switch Chip,and presented the validation and simulation of FPGA design I2C interface part using VHDL language,and then analyzed and compared the results of simulation,validated the result of the design of I2C interface part is correct,and at the same time,optimized the program.
给出了以太网交换芯片的I2C接口模块的设计方案;用VHDL语言给出I2C接口模块的FPGA设计的验证和仿真;对仿真结果进行分析比较,验证了I2C接口模块设计的正确性;对程序进行了优化。
4) I2C bus protocol
I2C总线协议
5) I2C bus communication protocol
I2C通信协议
1.
After the main AT24C02A featurers and I2C bus communication protocol being introduced,the design method of interface circuit between Nios Ⅱ and AT24C02A is introduced,including the definition of interface registers,the design of logic function module and driver writing.
针对这种保存的数据量不大特点,本文提出采用"NiosⅡ+AT24C02"设计方案,在介绍AT24C02A芯片主要特性和分析I2C通信协议原理基础上,重点介绍NiosⅡ与AT24C02A之间接口电路的设计方法,包括接口电路的寄存器定义、逻辑功能模块设计和驱动程序的编写三个方面的内容,利用嵌入式逻辑分析仪(SigalTapⅡLogic Analyzer)来分析接口信号时序,分析结果表,本接口所产生的读写时序满足I2C的通信协议要求,验证了设计的正确性。
6) Interface Protocol
接口协议
1.
Research on Interface Protocol Research of Digital Television s Multimedia Message System;
数字电视多媒体消息系统的接口协议
2.
Through the study of the current power system software architecture based on the component reusage,shortages in the design of its interface protocol between components are pointed out,i.
通过对当前基于构件复用技术的电力系统软件体系结构的研究,指出了当前多层次的电力系统构件复用软件体系结构在进行构件间接口协议设计时存在的问题,即构件的安全性、构件对象模型的管理及构件之间的互操作方面。
3.
The basic theory of three compatible standard interfaces was introduced,the implementing method of two wireless interfaces was described,the interface protocol and data communication process were discussed.
介绍可以兼容的三种标准接口基本原理,并重点阐述其中两种无线接口实现方法,讨论了接口协议和数据传输过程等实际问题。
补充资料：3dapi(3d应用程序接口)
3d api (3d应用程序接口)
application programming interface(api)应用程序接口,是许多程序的大集合。3d api能让编程人员所设计的3d软件只要调用其api内的程序，从而让api自动和硬件的驱动程序沟通，启动3d芯片内强大的3d图形处理功能，从而大幅度地提高了3d程序的设计效率。几乎所有的3d加速芯片都有自己专用的3d api，目前普遍应用的3d api有directx、opengl、glide、heidi等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条