1) in mast
内门架
2) portal
[英]['pɔ:tl] [美]['pɔrtḷ]
门架
1.
Optimum analysis of loading location in portal of lining shutter;
衬砌台车门架支撑点的布置分析
3) portal frame
门架
1.
The Finite Element Analysis for the Structure of Portal Frame of Fork Lifter Based on ANSYS;
基于ANSYS的叉车门架结构计算机辅助分析
2.
According to practical engineering experience,the article introduces the check calculation of the portal frame in bridge of in-situ continuous beam that overpasses the existing freeway.
文章根据黄衢南高速公路(浙江段)A1标五里枢纽H匝道1号桥跨杭金衢高速公路现浇连续梁施工的经验,介绍了现浇连续梁跨高速公路既有线的支架门架检算方法。
3.
In this paper, the important component------thepneumatic double-manipulator portal frame of the system is analyzed by Finite Element Method(FEM).
本课题以SMC南京技术中心和济南—机床集团有限公司联合研制的FMC——MJ460柔性加工单元为研究对象，对该系统中的重要结构部件——气动双机械手门架装置进行了有限元分析。
4) gantry
[英]['ɡæntri] [美]['gæntrɪ]
门架
1.
Non\|anchor\|block lifting and pushing method adopts large gantry lifting equipment,gantry does not need pulling rope and anchor block and the working process of this method consists of two actions, lifting and pulling.
无锚点吊推法采用门架吊装大型设备 ,门架无需拉绳和锚点 ,其工作过程由吊和推两种动作组成。
5) mast
[英][mɑ:st] [美][mæst]
门架
1.
Optimal analysis and parametric modeling of mast assembly for fork lift truck based on ADAMS
基于ADAMS的叉车门架系统参数化建模及优化分析
2.
Finite element analysis and dynamic simulation of multi-direction side-loading forklift truck's mast
全向侧面叉车门架有限元分析及运动仿真
6) Inner door
内门
1.
Inner doors in a dwelling house may fall into "fram door" and "Joinery door" This article will expound this manufacturing process according to their materials and structures.
住宅内门可分为“框架门”和“细木工门”，本文按其材料、结构分别阐述了制造工艺。
补充资料：经皮经颈静脉肝内门体静脉内支架分流术
经皮经颈静脉肝内门体静脉内支架分流术
介入放射学技术。也称经皮经颈静脉肝内门体静脉分流术(TIPS)，1969年最初由Rosch等首先报道。经颈静脉送入导丝，于门-腔静脉间经肝实质建立通道，并放入支架以形成永久性分流径路的治疗方式，以降低门脉压力，治疗顽固性的食管胃底静脉曲张出血及顽固性的腹水。该技术除常规导丝、导管、球囊扩张导管等外，需向建立的分流通道内置入支架，常用的有Z-型支架、Wallstent支架、Strecker支架等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条