1) cutting power
锯切功率
1.
This paper studied the status of desert-shrub resources and the cutting condition in western region of Inner Mongolia,preliminarily analyzed the cutting force and the cutting power of Caragana,and designed a cutting tool for desert-shrub using a tractor as power source.
对内蒙古西部地区的沙生灌木资源状况及其采伐现状进行了调查研究,对柠条材的锯切力进行了测试,分析了锯切功率,并设计了以小四轮拖拉机为动力源的沙生灌木采伐机具。
2) the sawing rate
锯切率
3) Fuel consumptio?
锯切耗油率
4) cutting power
切削功率
1.
Data acquisition and pretreatment of cutting power in milling process;
铣削过程中切削功率的数据采集和预处理
2.
Introduced a kind of new method by means of frequency track method to measure cutting power of woodworking machines.
介绍了一种用频率跟踪法测量木工机床切削功率的新方法。
3.
This paper introduce a kind of studying method for testing cutting power to freosaw blade on the woodworking push table saw machine.
介绍了一种测试木工推台锯[1]上圆锯片的切削功率的研究方法。
5) power spectrum slice
功率切片
1.
According to the spots distributing characteristics and reconstruction theory, power spectrum slice technique is presented, by which the 3-D distribution of space domain, deflection angle and power domain is constructed.
算法依据生物芯片样点阵列空间分布特点,并基于重构原理,提出了环形投影方法和功率谱估计相结合的功率切片方法,并以此建立起样点阵列的像素位置、偏转角以及功率值的三维分布关系,实现斑点阵列中偏转角度的精确计算。
6) incising power
切割功率
1.
To reduce the waste of incising power for the sugarcane cutter and satisfy with need of the lower broken biennial root rate,in the paper,experimental study was done through four factors and two indexes(incising power and broken biennial root rate)for rotating speed of cutter,harvester forward speed,cutter obliquity,knife-edge angle on test-bed of double sugarcane cutters.
为了减少甘蔗切割器的切割功率耗损、切割损失并满足切割甘蔗破头率小的要求,在双刀盘甘蔗切割试验台上,通过对刀盘转速、台车行走速度、刀盘前倾角、刀片刃角进行四因素与二指标(切割功率、破头率)进行试验研究,采用二次回归旋转组合设计、综合平衡法等分析方法,得出四因素的优化值下切割功率与破头率最小。
补充资料：锯切
用边缘具有许多锯齿的刀具(锯条、圆锯片、锯带)或薄片砂轮等将工件或材料切出狭槽或进行分割的切削加工。锯切可按所用刀具形式分为弓锯切、圆锯切、带锯切（见图）和砂轮锯切等。①弓锯切是将锯条张紧在弓形的锯架上，并作直线往复运动，对工件进行切割,一般在弓锯床（见锯床）上利用动力锯切,也可用手工锯切。由于弓锯切在回程时不进行切削，故效率较低。②圆锯切是在圆锯床上由主轴带动圆锯片旋转对工件进行连续切割，效率较高。③带锯切是在带锯床上利用两个轮子把长而薄的环形锯带张紧，并驱动锯带作连续运动对工件进行切割。宽带锯切的效率高，切口窄,有取代弓锯切的趋势;窄带锯切适于切割扁平工件的外部曲线轮廓或成形的通孔。④砂轮锯切是用高速旋转的薄片砂轮切割工件，适于切割难加工金属材料。各种锯切方法的精度都不高，除窄带锯切外，一般用于在备料车间切断各种棒料、管料等型材。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条