1) blood coagulation process
血凝过程
1.
A blood coagulation process is accompanied by characteristic changes of crystal surface mass,viscoelasticity and stress.
由血凝各阶段的压电参数变化规律，和血凝过程的生化变化，并注意到压电传感最敏感部分为其电极表面，阐明了血凝三个阶段的复杂压电响应机理，提出了相应的压电传感方程，及从血凝压电特征曲线上提取血液流变学信息的方法。
2.
A blood coagulation process on a quartz crystal electrode with a mini dropblood was studied.
研究了在石英晶体电极上微滴血的血凝过程。
2) Solidification Process
凝固过程
1.
Solidification Process and Structure of High Alloy Steel Vanadis4;
高合金钢Vanadis4凝固过程及组织
2.
Simulation study of effects of cooling rate on microstructure of liquid metal Na during solidification processes;
冷速对液态金属Na凝固过程中微观结构影响的模拟研究
3.
Effects of Sr on Solidification Process of AZ91D Magnesium Alloy;
微量Sr对AZ91D镁合金凝固过程的影响
3) Solidification
[英][sə,lidifi'keiʃən] [美][sə,lɪdəfə'keʃən]
凝固过程
1.
Progress on numerical simulation of mold filling and solidification processes of shaped castings;
铸件充型凝固过程数值模拟研究
2.
Numerical Simulation of Thermal Stresses of Castings during Solidification Based on Personal Computer and Its Engineering Application;
基于微机的铸件凝固过程应力数值模拟及工程应用
3.
The Progress of the Numerical Simulation of Microstructure in the Casting Solidification;
铸件凝固过程微观数值模拟方法进展
4) flocculation process
絮凝过程
1.
An on line flocculation monitoring technique which can continuously monitor the flocculation process of sludge particle during sludge conditioning and dewatering process is applied, which forms a fully new technique of sludge flocculation mo.
利用一种在线絮凝检测技术可连续检测污泥调理工艺中污泥颗粒絮凝过程 ,从而形成了一种全新的污泥絮凝检测方法 ,为污泥调理和脱水工艺的过程控制提供了可能
2.
In practice, the flocs, often loosely distributed, hard to sediment and easy to break, make the flocculation process rather complicated and chaotic characterized.
絮凝过程是给水和废水处理工艺中应用最普遍的关键环节之一,它在很大程度上影响着后续流程的运行工况、最终出水质量和成本费用,因而成为环境工程中重要的科技研究开发领域。
3.
The results were certain that the flocculation process can be controled by meteraging of the flocs\' fractal dimension.
证明可以通过监测絮凝体的分形维数来控制絮凝过程。
5) solidification processes
凝固过程
1.
Molecular dynamics simulation of amorphous formation during solidification processes of liquid metal Ag_6Cu_4;
液态金属Ag_6Cu_4凝固过程中非晶转变的分子动力学模拟
2.
A simulation study has been performed for a large liquid metal system consisting of 1,000,000 Na atoms to investigate the formation and evolution of nano-cluster configurations during the solidification processes.
采用分子动力学方法对含有100万个 Na 原子的液态金属大系统在凝固过程中纳米级团簇结构的形成与演变进行了模拟研究。
6) solidifying process
凝固过程
1.
By adopting finite element method and finite element analytic software ANSYS, the numerical simulation of solidifying process had been carried out on the actual castings in production, and obtained the temperature field, which varies alone with time, of castings.
采用有限元方法及有限元分析软件ANSYS ,对生产中实际铸件进行凝固过程数值模拟 ,得出铸件随时间变化的温度场。
2.
All kinds of disfigurements, such as shrinkage, porosity and distortions and so on, come into being in the solidifying process or relate closely to it.
如何通过科学计算和形象描绘,优化最佳方案并形成工艺文件,尽可能以较少的人力物力生产出优质铸件,是铸造凝固过程数值模拟的主要任务。
3.
This work has provided references for the controlling the solidifying process of bloom.
通过对石家庄钢铁有限公司炼钢厂电弧炉炼钢车间矩形坯连铸机所生产钢种进行的射钉试验和铸坯表面测温研究,测量不同工况下的凝固坯厚度和铸坯表面温度,计算出相应钢种铸坯综合凝固系数,为汽车钢矩形坯连铸凝固过程的合理控制提供了依据。
补充资料：凝血致活酶 ,血液凝固因子Ⅲ,凝血质
药物名称：凝血因数Ⅲ
英文名：Thromboplastin
别名： 凝血活素;凝血酶原激酶;凝血因数Ⅲ;凝血致活酶 ,血液凝固因子Ⅲ,凝血质
外文名：Thromboplastin
适应症： 用于各种出血、止血。
用量用法： 肌注：每次７．５～１５ｍｇ,Qd或Bid。局部止血时可湿敷。
注意事项： 1.肌注以前要摇匀。 2.不可静注（可引起血栓形成）。
规格： 注射液：１５ｍｇ（２ｍｌ）。
类别：促凝血药
英文名：Thromboplastin
别名： 凝血活素;凝血酶原激酶;凝血因数Ⅲ;凝血致活酶 ,血液凝固因子Ⅲ,凝血质
外文名：Thromboplastin
适应症： 用于各种出血、止血。
用量用法： 肌注：每次７．５～１５ｍｇ,Qd或Bid。局部止血时可湿敷。
注意事项： 1.肌注以前要摇匀。 2.不可静注（可引起血栓形成）。
规格： 注射液：１５ｍｇ（２ｍｌ）。
类别：促凝血药
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条