1) support dynamic stiffness
支承动刚度
1.
This Paper describes the principle and method of measuring support dynamic stiffness of bearing pedestal of turbogenerator.
叙述了用锤击法实测和分析汽轮发电机轴承控支承动刚度的原理和方法。
2) Dynamic supporting stiffness
动态支承刚度
3) Supporting stiffness
支承刚度
1.
Analysis on influence of supporting stiffness on rotor dynamics property of steam turbine;
支承刚度对汽轮机转子动力学特性的影响分析
2.
This frequency is brought into the transfer matrix method,which contains unknown quantity of the supporting stiffness.
给出圆板弹性支承的传递矩阵,并用计算机代数语言编写圆板环形条元及支承元件的传递矩阵,通过试验模态分析,确定圆板轴对称振型及频率,将该频率代入含待识别支承刚度的传递矩阵法中去,就可直接识别其刚度,并通过实验验证了此法的有效性。
3.
The characteristics of a gas turbine engine with ERSFD including the supporting stiffness of the elastic ring,the distribution of pressure field and oil film damping were investigated by taking advantage of the elastic deformation of the elastic ring.
以燃气涡轮发动机用ERSFD为对象,基于有限元挤压油膜理论对ERSFD的弹性环支承刚度、油膜压力场分布和油膜阻尼等特性进行了研究。
4) bearing stiffness
支承刚度
1.
The Research on Bearing Spacing and Bearing Stiffness of Urban Rail Transit;
城市轨道交通钢轨支承间距与支承刚度相互关系的研究
2.
Long-term investigations show that the most effective measure is the disposal and adjustment of the bearing stiffness of subsoil as well as the difference settlement control for the pile foundations.
研究表明:对地基(含桩基)的支承刚度的大小和分布进行合理的调整是差异沉降控制设计最有效的方法。
3.
Because bearing stiffness have an effect on interface rotation spee.
因支承刚度对转轴临界转速有影响,故仅介绍支承刚度的计算方法。
5) support stiffness
支承刚度
1.
Therefore,the subgrade support stiffness is an important technological condition for paving the ballastless track on the subgrade.
无碴轨道结构将松散的道碴换成了刚度巨大的钢筋混凝土材料,使得无碴轨道结构对路基的变形和刚度极其敏感,因此路基面的支承刚度是路基上铺设无碴轨道的重要技术条件之一。
6) support rigidity
支承刚度
1.
The support rigidity option and greatest bearing capacity calculation of continuous beam with elastic support reinforcement;
支点加固梁弹性支承刚度的选择与最大承载力计算
2.
6 set of Jing Yuan Generating Pawer Plant,and measuring the generator support rigidity,it is concluded that the cause of heavy bush vibration is support rigidity too low.
通过对靖远电厂6号机组发电机5号、6号轴瓦振动状况的监测以及机组运行状态下的试验 ,结合发电机支承刚度的定量检测 ,认为造成6号发电机轴瓦振动较大的根本原因是支承刚度太低。
补充资料：因水火风动故地动
【因水火风动故地动】
经云：此阎浮提地，南北阔二万一千由旬，东西阔七千由旬，厚六万八千由旬。地下有水，厚八万四千由旬。水下有火，厚八万四千由旬。火下有风，厚六万八千由旬。风下有金刚轮，过去诸佛舍利，咸在其中。或有时大风忽动，火亦随动。火既动已，水复随动。水既动已，地即随动。故云因水火风动故地动。（梵语阎浮提，华言胜金洲。梵语由旬，华言限量，或四十里，或六十、八十里也。）
经云：此阎浮提地，南北阔二万一千由旬，东西阔七千由旬，厚六万八千由旬。地下有水，厚八万四千由旬。水下有火，厚八万四千由旬。火下有风，厚六万八千由旬。风下有金刚轮，过去诸佛舍利，咸在其中。或有时大风忽动，火亦随动。火既动已，水复随动。水既动已，地即随动。故云因水火风动故地动。（梵语阎浮提，华言胜金洲。梵语由旬，华言限量，或四十里，或六十、八十里也。）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条