1) computer control / programmable controller

计算机控制/可编程控制器
2) PCC

可编程计算机控制器(PCC)
3) programmable computer controller

可编程计算机控制器
1.
A kind of computer control system with programmable computer controller was established on the basis of control technique.
论述了一种应用可编程计算机控制器技术的卷绕机控制系统结构及其设计方法。
2.
A newcontrol-ling system with high performance was designed by using the programmable computer controller(PCC) toi mprove the synthetic ability and automatic level of the machine.
以一台进口大型注塑机为对象,综合运用机械学、液压传动以及控制理论,对注塑机的运动控制、动力传递控制、温度控制以及控制系统构建进行深入研究,并利用可编程计算机控制器(PCC)作为硬件设计一个全新的高性能控制系统,提高设备的综合性能和自动化程度。
3.
The paper introduces the working principle,the software and hardware design of the double-hot-standby control system based on programmable computer controller.
介绍了基于可编程计算机控制器的双机热备控制系统的设计思想、工作原理及软硬件设计;PCC与Lenze变频器之间采用CAN总线通信,实现三相异步电机的控制。
4) programmable computer controller(PCC)

可编程计算机控制器(PCC)
5) PCC

可编程计算机控制器
1.
Development of PCC IGBT Excitation System;

基于可编程计算机控制器IGBT励磁系统的开发
2.
In order to improve the capability of turbine governor and synchro generator excitation equipment,a scheme is proposed that the programmable computer controller(PCC) be applied to the development of excitation adjuster.
为了提高微机型水轮机调速器和同步发动机励磁装置的各项性能,提出了用可编程计算机控制器(PCC)研制调节器的方案。
3.
The article analyzed the defect and weakness of controlling system in DF4 diesel locomotive and put forward the new controlling method based on PCC.
内燃机车电控系统是一个复杂的控制系统,长期以来一直采用继电器、接触器控制系统来完成控制功能,论文分析了目前内燃机车上继电器、接触器控制系统中存在的缺点和不足,提出了采用可编程计算机控制器(PCC)作为控制核心完成机车相应电器及各功能模块的控制方法。
6) programmable control computer(PCC)

可编程控制计算机(PCC)
补充资料:四连杆装箱包装机中可编程控制器的应用(中)
3、5 为了使PLC系统安全可靠运行,采取了多种防护措施,如和系统中的强电设备分开接地,接地线的截面积大于2平方毫米。PLC输入和输出的感性负载都并联续流二极管等,以消除输入触点在断开时,感性负载因储能作用而产生电弧高于电源电压数倍甚至于数十倍的反电势对系统产生的干扰。见图(3)。![]() 3、6 系统的输入部分36点,输出19点,一共占用PLC 54点,系统冗余6点,符合自动化系统设计要求。 4、程序设计 PLC程序采用梯形图编写,其自动控制操作流程图见图(4)。其中,PLC主程序参照原有继电器控制系统的电气控制原理图进行设计,这种程序设计方法简单,有现成的电气控制线路为依据,设计周期短,在旧设备电气系统改造中经常采用。 ![]() 按照原有电气控制系统输入信号及输出信号做为PLC的I/O点,原来由继电器硬件完成的逻辑控制功能由PLC软件——梯形图替代完成。图(5)为四连杆装箱包装机进箱臂部分电气控制原理图。图(6)为转换后的四连杆装箱包装机进箱臂部分PLC程序梯形图。进箱臂部分主要I/O对照表如下 ![]() ![]() ![]() | |
|
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条