1) debris composition
磨屑组分
2) wear debris analysis
磨屑分析
3) detrital composition
碎屑组分
1.
,the characters of the detrital composition of the Mesozoic sandstones at the southern margin of the eastern Qinling and Dabie orogenic belt are studied to determine the type of their source areas.
利用Dickinson、Suczek等人建立的砂岩碎屑模型,对东秦岭大别造山带南侧中生代盆地碎屑岩的组分特征进行研究,分析碎屑岩的物源区类型,认为中生代砂岩物源主要来自东秦岭大别造山带、龙门山、江南逆冲带,具有明显的再旋回造山带属性,碎屑组分变化序列是盆缘造山带3期逆冲活动的沉积响应。
2.
Based on the sandstone clastic model built by Dickinson et al,the characteristics of detrital composition of the Late Triassic-Jurassic sandstones in the Middle and Upper Yangtze region are studied to determine the types of source areas.
利用Dickinson等人建立的砂岩碎屑模型,对中上扬子地区晚三叠世—侏罗纪砂岩的组分特征进行研究,分析碎屑岩的物源区类型,认为晚三叠世—侏罗纪砂岩物源主要来自东秦岭—大别造山带、龙门山、江南逆冲带,具有明显的再旋回造山带属性,碎屑组分变化序列是盆缘造山带三期逆冲活动的沉积响应。
3.
According to the research on detrital composition of Mesozoic sandstone, it is p roposed that the detrital maturity of the sandstone in Beipiao (Jin-yang) basin is low, and these sandstones contain abundant volcanic lithics,quartz and felds par.
根据北票 (金—羊 )盆地中生界砂岩碎屑组分分析 ,综合区域构造演化背景、盆地沉积充填序列及砾岩特征 ,对盆地中生代物源及构造演化进行了示踪 :晚三叠世为盆地构造活化的起始阶段 ,盆地物源应主要来自周缘隆升蚀源区的前中生代碎屑沉积物 ;早侏罗世辽西地区发生了明显的差异升降 ,北票 (金—羊 )盆地相对伸展陷落 ,盆地范围有所扩大 ;晚侏罗世北西—南东向逆冲推覆作用成为盆地的主要控制因素 ,北票 (金—羊 )盆地具有明显前陆盆地特征 ,盆地西缘太古代变质岩系出露剥蚀而成为盆地的主要物源之一 ;早白垩世辽西地区发生构造反转 ,北票 (金—羊 )盆地相对萎缩。
4) debris
[英]['debri:] [美][də'bri]
磨屑
1.
Under the analyses of the development state for the debris on-line monitor in gearbox,the paper presents a kind of debris on-line monitor,in which the Electromagnet is used to cluster the debris,and HALL Components are used to measure the changes of the concentration for the debris in oil.
在分析国际上现行的磨屑在线监测传感器的基础上,提出了一种新型的磨屑监测传感器-电磁铁重复聚集磨屑,霍尔器件测量磨屑量的变化的磨屑,并对磨屑的传感与测量方式进行了实验研究。
2.
The wear debris of three semi-metallic friction materials reinforced by low carbon steel fiber,brass fiber and pure copper fiber respectively,and grey cast iron couple woren at different temperatures were studied by XRD and EDAX.
采用X射线衍射(XRD)和X射线能谱分析(EDAX)对分别使用低炭钢纤维、黄铜纤维和紫铜纤维增强的3种半金属摩擦材料与灰铸铁在不同温度下滑动摩擦形成的磨屑进行分析,并结合扫描电子显微镜(SEM)观察摩擦材料表面形貌,分析材料的磨损特性,并对黄铜纤维和紫铜纤维增强的摩擦材料磨屑成分进行对比分析。
3.
The debris of the composite has also been investigated by the DSC,FT-IR and SEM technique.
用环-块磨损实验机对复合材料进行了磨损试验,用SEM方法对复合材料的磨损表面进行了观察和分析,并利用DSC、FT-IR和SEM分析方法对复合材料的磨屑进行了研究,在上述基础上进行了复合材料的磨损机理探讨。
5) chip
[英][tʃɪp] [美][tʃɪp]
磨屑
1.
Inis necessary to produce efficiently qualified carbide chip with increasing application of cemented carbide tools material,Under conditions of dry and wet grinding,experimental investigation was carride out for plane grinding of YG6 and YT30 re-spectively.
本课题在干磨和湿磨条件下，分别对YG6和YT30进行了平面磨削的实验研究，并利用扫描电镜观察了在不同的磨削条件下，被磨削表面形貌、磨屑及磨削断面结构，在此基础上分析研究了硬质合金磨削过程中的材料去除机理。
6) wear debris
磨屑
1.
Effect of LPS on the osteolysis induced by wear debris in artificial joints;
脂多糖对人工关节磨屑诱导的骨溶解的影响
2.
Experimerntal study of etanercept effects the wear debris-induced osteolysis;
依那西普对磨屑诱导骨溶解影响的实验研究
3.
The wear debris are analyzed by Xray diffraction and worn surfaces by SE.
磨屑的Ｘ射线物相分析结果表明，加Ｎｉ、Ｔｉ的ＳｉＣ陶瓷复合材料与原ＳｉＣ陶瓷材料相比，在高温下的摩擦机制有着本质的不同，从而造成在摩擦学性能上有较大的差异。
补充资料：滴屑屑
1.颤抖貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条