说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 点专题
1)  Point theme
点专题
2)  subject hotspot
专题热点
1.
Evaluation of the efficiency of co-word cluster and subject heading cluster in mining subject hotspots
共词聚类法和主题词聚类法挖掘专题热点的效果评价——以鼻咽部肿瘤为例
3)  the column of the ice point
"冰点"专题报道
4)  special topic
专题
1.
The whole program has a structure of special topic with various recording techniques and innovating consciousness interwoven in it.
《中国侏罗纪公园》是纪录专题探索的一种创新努力的体现。
2.
Secondly, the themes of the theses for reports on special topics in the conference were analyzed.
首先简介了本届大会的基本情况 ,其次对大会专题报告论文的主题进行分析 ,再次概述了墙报与书面交流论文研究的方法学特征 ,最后对论文作者分布情况做出分析。
3.
Under this background, we put forward the research study on special topic at Chinese teaching area.
在此背景下,我们提出在语文教学领域开展专题研究性学习。
5)  special subject
专题
1.
Practice and exploration of constructing database on special subject;
专题数据库研建的实践与探索
2.
In the investigation of special subject--″qresent dwelling state and requirements of old people in Hangzhou″,the present dwelling state and satisfaction degree of existing housing suitable for old people are described quantitatively and qualitatively,and proposals for improving old poeople s living condition are offered.
通过对“杭州老年人居家养老居住现状及需求”的专题调查,采用定量与定性的方法,分析评估杭州市老年人居住的现状,及对现有住房适合养老的满意度,提出改善居家养老居住条件的建议。
3.
Pointed out this question needs special subject and subject research, and after comprehensive ordering,we got a list of reference plants.
提出了需要进行相关的主题和专题研究,以及权衡各因子后的综合排序,形成一份苗木备用表。
6)  Theme [英][θi:m]  [美][θim]
专题
1.
Automatic Edge Match Technology between Subcompartment Polygon Themes and Its Application;
小班多边形专题自动接边技术及其应用
2.
As a distinctive resource of cultural tourism, it also has a great potential value of tourism from the perspective of tourist assessment, it is very important that the art of Chinese calligraphy was developed with themes in a systematic way.
中国书法艺术历来具有撼人心魄的魅力,作为我国一种独特的文化旅游资源其自身潜藏着巨大的旅游价值,从旅游评价的角度看,对其进行系统地专题性开发意义十分重要,并具有紧迫性。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条