1) inertial pulse response

惯性脉冲响应
1.
In this paper,inertial pulse response of MEMS capacitive accelerometer with non-parallel combs is studied considering the air damping in low vacuum,and the effects of DRIE process on performance of the micro-accelerometer are analyzed.
研究结果表明,当传感器为没有静电力反馈的双边电容结构时,梳齿电容的不平行对传感器的响应位移、惯性脉冲响应线性度范围影响明显,且随着封装真空度增加而加重。
2) impulse inertia

脉冲惯性
3) inertial response

惯性响应
1.
The lateral nonlinear inertial response and kinematic responses of single pile under dynamic and seismic loads are discussed according to the developed simplified model and computational methods.
根据已建立的地基土—单桩系统横向非线性动力响应简化分析模型和计算方法,讨论了动力荷载作用下单桩横向非线性惯性响应以及地震作用下单桩横向非线性运动响应,采用两个非线性运动响应因子表征地基土—单桩系统运动响应的非线性特性。
2.
To augment wind energy rates,we investigated the contribution of doubly fed induction generator(DFIG)to system inertial response and frequency regulation,and analyzed the influence of auxiliary loop parameters on the inertial response.
系统频率控制能力随着电力系统风力发电渗透率的增加而降低,为了扩大风能比率,讨论了双馈风力发电机对系统惯性响应和频率控制的影响,分析了增加辅助惯性控制回路参数的作用。
4) directional impulse response

方向性脉冲响应
5) impulsive response charactoristic

脉冲响应特性
1.
The platform is used to study the impulsive response charactoristic between different kinds of fruits,different quality of same fruits,and different parts of one fruit.
从Cooke理论出发,采用自行研制的微型压电加速度计构建试验平台,对不同品种、同一品种不同品质、同一水果不同部位的苹果和橙子的脉冲响应特性进行了初步研究,试验结果表明:不同品质的水果具有不同的冲击响应频率,由此提出了瓜果品质脉冲响应特性检测系统的构想。
6) impulse response

脉冲响应
1.
Efficiency-based impulse response analysis between industrial output and wastewater effluent;
基于效率的工业产值与废水排放量脉冲响应分析
2.
Mechanism research of jamming point detection in oil pipelines based on impulse response;

基于脉冲响应的输油管道堵点位置检测机理
3.
Damage diagnosis of structures based on singular spectrum entropy and impulse response;

一种基于奇异谱熵和脉冲响应的结构损伤诊断方法
补充资料:脉冲响应法
分子式:
CAS号:
性质:线性系统在零初始条件下,输入单位脉冲函数(加以高度为无限大,宽度为无限小,面积为1)信号后输出的瞬态响应,即输出响应叫脉冲响应。建立系统非参数模型时,即给系统施加一个脉冲信号,观测系统脉冲响应,以求得系统数学模型的待定参数。有了数学模型以后,即可进行分析系统的动态特性,设计控制器等。
CAS号:
性质:线性系统在零初始条件下,输入单位脉冲函数(加以高度为无限大,宽度为无限小,面积为1)信号后输出的瞬态响应,即输出响应叫脉冲响应。建立系统非参数模型时,即给系统施加一个脉冲信号,观测系统脉冲响应,以求得系统数学模型的待定参数。有了数学模型以后,即可进行分析系统的动态特性,设计控制器等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条