1) evolution in the group
分组演化
2) oceanic constituents retrieval
组分反演
3) structure evolution
组织演化
1.
Features and microstructure evolution during high tempreature creep for AZ 31 Mg-alloy;
AZ 31镁合金高温蠕变特征及组织演化
2.
The superplastic tensile deformation behavior and the structure evolution law of high strength, high toughness and high damage-tolerant titanium alloy-TC21 have been investigated.
研究了新型高强高韧高损伤容限TC21钛合金的超塑性拉伸变形行为及组织演化规律。
4) structural evolution
组织演化
1.
Abstract: By employing the complex method of molten glass purification and superheating cycling, structural evolution and solidification behavior of undercooled Cu-20%Pb hypomonotectic, Cu-34.
通过分析不同成分Cu-Pb合金的冷却曲线和宽过冷区间的凝固组织,研究Cu-Pb亚偏晶合金、偏晶合金和过偏晶合金的凝固行为、组织演化规律及演化机制;利用经典形核理论和瞬态形核理论预测过冷熔体液液相变焓的可能范围。
2.
By employing the complex method of molten glass purification andsuperheating cycling, structural evolutions of undercooled Ni-2%Pb single-phase, Ni-25%Pb hypomonotectic, Ni-31.
44%Pb偏晶和Ni-40%Pb过偏晶合金的过冷凝固组织演化规律,通过对过冷熔体枝晶生长过程中热力学和动力学的理论计算分析其演化机制,利用经典形核理论和瞬态形核理论预测过冷熔体中相竞争形核规律,分析其凝固行为。
5) microstructural evolution
组织演化
1.
Modelling of microstructural evolution of aluminium alloy during thermomechanical processing;
铝合金热变形组织演化的模拟
2.
Hot Deformation Behavior and Microstructural Evolution of Pure Aluminum
工业纯铝的热变形组织演化
3.
The semisolid A2017 alloys provided with shearing/cooling roll (SCR) technology were reheated, and its microstructural evolution was studied by means of optical microscope, SEM and graphical analyzer.
对SCR技术制备的A2017半固态坯料进行二次加热,利用光学显微镜,电镜,图像分析仪等手段,对坯料二次加热微观组织的演化进行了研究·实验结果表明,在相同加热温度条件下,随着保温时间的延长,晶粒平均等积圆直径增大,晶粒越来越圆整,液相率增加;提高二次加热温度,晶粒长大和球化速度加快·二次加热最佳工艺条件为加热温度580℃,保温时间40~60min或者加热温度600℃,保温20~40min,晶粒平均等积圆直径为70~90μm,固相率在70%左右,适合于半固态加工·组织演化机制分析表明,加热初期阶段,液相少,晶粒主要通过碰撞熔合快速长大;随着保温时间延长,液相增加,晶粒主要通过原子扩散慢速长大并发生球化
6) microstructure evolution
组织演化
1.
Influence of microstructure evolution on lattice misfit of a single crystal nickel based superalloy;
镍基单晶合金组织演化及对晶格错配度的影响
2.
Dynamical microstructure evolution of Q235 low carbon steel during high temperature deformation;
Q235低碳钢高温变形过程的动态组织演化分析
3.
Numerical simulation of microstructure evolution during directional solidification of Ti-45at.%Al alloy;
Ti-45at.%Al合金定向凝固过程中显微组织演化的计算机模拟
补充资料:电话簿分组
电话簿分组功能是将现有电话簿根据用户需要,自定义分组的一种电话簿附加功能。
这种功能的好处是用户可更容易的通过分组找到想找的人的电话号码和相关信息;另外,当用户想给一些人发同一短信时可以按组发送,免去了逐个读取电话号码的繁复工作(需手机具备群发功能)。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条