1) Cooling-channel

冷却液通道
2) cooling passage

冷却通道
1.
Based on the RSM,the optimization of the blade cooling passage is implemented to minimize the maximum temperature of the blade,the facet average temperature of the blade surface and the total pressure loss.
以冷却通道肋的位置为设计变量,采用拉丁超立方抽样在变量设计空间里选取样本点,根据样本点建立叶片计算模型,采用流-热耦合分析方法得到叶片气动与传热性能参数,拟合得到叶片壁面最高温度、平均温度和总压损失关于设计变量的四阶响应面近似模型。
3) coolant duct

冷却剂通道
5) regenerative cooling channel

再生冷却通道
1.
Effect of aspect ratio on heat transfer and fluid flow in regenerative cooling channel of liquid rocket engine thrust chamber;
保持再生冷却通道个数及冷却工质进口流量不变,通过改变通道肋壁厚度来改变冷却通道深宽比,研究不同深宽比对推力室壁面再生冷却效果的影响规律。
6) micro-channel cooler

微通道冷却器
1.
The copper micro-channel cooler is designed for diode laser by analyzing of two keys, cooling techique and interfacial heat removal.
对激光二极管中冷却和界面联接热阻两个关键环节进行了分析 ,设计了一种五层结构的模块式铜微通道冷却器 ,对于腔长 0 。
补充资料:湿法炼锌系统浸出液净化车间的冷却塔
湿法炼锌系统浸出液净化车间的冷却塔
湿法炼锌系统浸出液净化车间的冷却塔
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条